P-3525 (2) 6 x 8-17 Goulds 3196 Centrifugal Pump 2400 gpm 110 ft. hd. DI/316SS Serial no. 768H983 (768H982 for P-3524), year 2022 Ductile Iron body, 316 ss impeller, shaft, mechanical seal. Both rated for 2400 gpm, 110 ft. Hd, 250 psi max at 1195 rpm Both with 16.75 inch diameter impeller 6 inch inlet, […]
Stock no. P-3512 (2) 2.5 inch MasoSine Sanitary Stainless Steel Low Shear Pump Masosine by Watson Marlow, Model MR125, serial no. 16151 1211 1 Hp, 1700 rpm, 230/460 v, 3 ph Eurodrive with manual speed control Has 5.67-1 ratio gear reducer Pump max operating speed is rated for 800 rpm, 145 psi O/a 16 x […]
Stock no. P-3509 3 inch MasoSine Sanitary Stainless Steel Low Shear Pump Model MR135, serial no. 16891 0413 Rated for .23 gallons per revolution up to 138 gpm. Max 600 rpm Does have some missing internal parts. Currently selling for parts or repair. (1) available
Stock No. P-1850 2 x 1.5 inch Tri-Clover SANITARY SS CENTRIFUGAL PUMP 3 HP Mfg. Tri-Clover. model and serial no. under clamp 3 Hp, 3450 rpm, 208- 230/460v, 3ph, 60 hz 2 x 1.5 inch tri-clamp in and out (1) available
Stock no. P-3422 (4) 2 x 3-10 Goulds 316 SS Centrifugal Pump Model 3196 Serial no. 713G554-4 with a 10 inch impeller 3 inch inlet x 2 inch outlet 10 Hp, 1725 rpm, 230/460 volt, 26.8/13.4 amp, XP motor Rated for 100 gpm and 107 ft. hd. (3) more similar available without motors
Stock Number: P-2704 2 inch FRISTHAM SANITARY SS CENTRIFUGAL PUMP Mfg. Fristham Pumps Model FP3532-140, s/n FSP3532013497 15 Hp, 3450 rpm, 208-230/460v, 3ph 2 inch outlet, front cover with inlet missing (1) available
Stock Number: P-2709 2 x 1.5 FRISTHAM SANITARY SS CENTRIFUGAL PUMP Mfg. Fristham Pumps Missing plate on this one 5 Hp, 3450 rpm, 230/460v, 3ph 2 x 1.5 inch in and out with (2) additional 1/4 inch fittings (1) available
Stock Number: P-2705 2 x 1.5-6 FRISTHAM SANITARY 316 SS CENTRIFUGAL PUMP Mfg. Fristham Pumps Model FP712-115, no. 12170670 1/2 Hp, 1725 rpm, 230/460v, 3ph 2 x 1.5 inch in and out with 1/4 inch drain (1) available
Stock Number: P-2703 2.5 x 3 inch FRISTHAM SANITARY SS CENTRIFUGAL PUMP Mfg. Fristham Pumps Model FP 3551-215, s/n FP355198232 10 Hp, 1755 rpm, 230/460v, 3ph 2.5 x 3.5 inch in and out with an additional 1 inch port (1) available
Stock Number: P-2470 2 x 1.5 FRISTHAM SANITARY SS CENTRIFUGAL PUMP Mfg. Fristham Pumps Model FPX-722, s/n FPX72298122 3 Hp, 3450 rpm, 208-230/460v, 3ph 2 x 1.5 inch in and out (1) available
Stock Number: P-3245 2 x 2.5 FRISTHAM SANITARY SS CENTRIFUGAL PUMP Mfg. Fristham Pumps Model FS13522-102 R2 S1, s/n FS135221317260 15 Hp, 3450 rpm, 208-230/460v, 3ph 2 x 2.5 inch in and out (1) available
Stock no. P-3264 (2) .33 HP 1 PH WATCHMAN B-STYLE PUMP CONDENSATE BOILER FEED TYPE 1 inch threaded top port, 1 x 2.5 inch bottom rectangular port Cast Iron construction made by Hoffman 1/3 Hp, 3450 rpm, 115-208/230 v, 1 ph Designed for use on condensate and boiler feed units Precision balanced bronze impeller for […]
Stock no. P-3248 2.5 x 1.5-6 GOULDS G & L STAINLESS STEEL CENTRIFUGAL PUMP 4SHK6, 4SH2J57D2, date 5/3/16 Approx. 5 Hp (plate worn), 208-230/460 volt, 3 phase 2.5 inch x 1.5 inch flanged fittings, 5.62 inch diameter impeller Last used on a Horizontal Tunnel Washer (1) available
Stock no. P-3177 2.5 x 1.5 inch SANITARY SS CENTRIFUGAL PUMP 5 Hp Alfa Laval Model LKH10, description LKH10M150SS2EN18CA, no. 607081-07 5 Hp, 230/460 v, 3 ph Sanitary stainless steel, 2.5 x 1.5 inch tri-clamp connections Last used in a beverage recovery system (1) available
Stock no. P-2946 1.25 inch GRUNDFOS MULTI STAGE STAINLESS STEEL CENTRIFUGAL PUMP Type CRN-3-5 A-FGJ-G-E-HQQE Model A96083904-P1092596 3/4 Hp, 3450 rpm, 115/230 volt, 1 ph, 60 hz Rated for 116.5 to 156.5 ft. head and to 15.41 gpm 1.25 inch flanged in and out Used for Reverse Osmosis water circulation (1) available
Stock no. P-2812 2.25 x 2.25 STAINLESS STEEL SUMP PUMP Has threaded 2.25″ in and out, all stainless steel construction 3-wire single phase, most likely 115 v No identifying marks From a food plant, subject to testing (1) available
Stock no. P-2719 Iwaki America plastic composite centrifugal pump CMD 187, no. 0510060620 1.5″ x 1.75″ id in and out 3 Hp, 3450 rpm, 208-230/460v, 3ph Rated for 10 gpm, 70 ft. hd. Does have a broken base, but otherwise looks great. (1) available
Stock no. P-2564 1 inch GRUNDFOS STAINLESS STEEL MULTI STAGE CENTRIFUGAL PUMP Grundfos Pumps no. CRN4 60 a-a-a, c-8932 Stainless steel vertical multi-stage pump rated for 300 psi @ 250 deg max, 5 cu. meters/hr.(22 gpm), 68 meters head (223 ft.) 1 inch inlet and outlet Approx. 3 Hp, 208-230/460 volt, 3ph (1)available.
Stock Number: P-2710 Fristham 2.5 x 2 inch 316 Sanitary Stainless Steel centrifugal pump Model FP 742-195, serial no. 42174266 20 Hp, 3510 rpm, 230/460v, 3ph, 45.6/27.8 amp 2.5 x 2 inch tri-clamp in /out From a BioPharma operation (1) available
Stock Number: P-2297 1 INCH G & L MULTI STAGE STAINLESS STEEL CENTRIFUGAL PUMP Mfg. G & L Pump div. of ITT Goulds Model SSV 1SVOK4 1 Hp, 3450 rpm, 230/460v, 3ph Stainless Steel contacts Rated for 360 psi @ 250 deg. F Includes Aquavar 56 controller (1) available
Stock Number: P-2330 Mfg. Worthington 60 740846 1.5 x 1 inch in & out, 6 inch impeller Will sell as is or with motor setup (1) available
Stock Number: P-2562 1 inch GRUNDFOS SS MULTI-STAGE CENTRIFUGAL PUMP Grundfos stainless steel multi-stage pump Model CR4, NH-C5-60, 9046 Rated for 300 psi @ 250 deg. F 3 Hp, 3450 rpm 208-230/460 v, 3ph 1 inch in & out. Stainless Steel (1) available
Stock Number: P-2119 2 X 1.5 INCH SANITARY SS CENTRIFUGAL PUMP 15 Hp Mfg. Tri-Clover Pump Model C21 21647RH922 2 x 1.5 inch tri-clamp in and out 15 Hp, 3525 rpm, 230/460v, 3ph Rated for 50 gpm, 235 ft. head (1) available
Stock Number: P-1830 2 X 1.25 INCH STAINLESS STEEL CENTRIFUGAL PUMP Mfg. G & L Pumps div. of ITT/Goulds Model SST 5 Hp, 1730 rpm, 208-230/460v, 3ph 2 x 1.25 inch with 9 3/4 inch impeller (1) available
Stock Number: P-2182 2 x 2.5 inch FRISTHAM SANITARY SS CENTRIFUGAL PUMP Mfg. Fristham Pumps Model FP 742-205, s/n FP74296696 15 Hp, 3450 rpm, 208-230/460v, 3ph 2 x 2.5 inch in and out, 1/4 inch drain rated for 110 gpm, 260 ft. hd. (1) available
Stock Number: P-2178 3 X 1.5 INCH INGERSOLL RAND CENTRIFUGAL PUMP Mfg. Ingersoll Rand 3×1.5x8HOC Stainless steel Rated for 150 gpm, 200 ft. hd., 350 psi @ 3500 rpm 3 inch x 1.5 inch in and out Sell with or without motor setup (1) available
