Stock no. C-2742 (2) 24 inch STAINLESS STEEL SWECO SCREENER SEPARATOR 440 V Model LS24-585-76, serial no. LS24544 1/3 Hp, 440 v, 3 ph, 1200 rpm motor (2) stainless steel decks and (1) screen Will sell with or without additional stand approx. 3 ft. tall (2) similar available SALE PENDING ON THIS ONE.
Stock no. C-2702 30 inch SWECO TYPE STAINLESS STEEL SCREENER SEPARATOR Manufacturer Westpro Machinery Corp. Model RS30-1, no. 08-08-RS30-1-1679-4, part no. 1679-4 480 volt, 3 phase, 60 hz 30 inch diameter decks and screens (additional deck not pictured included) Polished stainless steel. 6 inch side outlet. Lid has a 4.5 and 7.5 inch top inlets […]
Stock no. F-0195 20 oz. CARTRIDGE TYPE VACUUM CENTRIFUGE 8 CARTRIDGE Will handle up to 20 ounce and smaller cartridges & vials , (8) cartridge holders 36 inch diameter x 20 inch flat bottom dish top Stainless contacts, suitable for vacuum 16 inch center top opening 5 hp motor, 1725 rpm, 208-230/460 volt, 15-12.2/3.6 amp Soft start […]
Stock Number: B-0685 Mfg. Raymond Combustion Engineering Lab Separator, Double Wizzer 1/2 Hp, 3500 rpm, 115/230v, single phase 2.5 and 2 inch bottom outlets (1) available
Stock Number: F-0182 CENTRA SCIENTIFIC MODEL 8R REFRIGERATED CENTRIFUGE Mfg. Centra Scientific Model 8R, no. 24781330 120v, single phase. To 5900 rpm, 0-34 deg C Uses R12 refrigerant. Takes 750 ml vials Powers up, with manual. Timer 1 to 59 min. (1) available
Stock Number: F-0175 BECKMAN COULTER LAB CENTRIFUGE Mfg. Beckman Coulter No. 4480/7860, cat. no. 448003 Array 360 Protein, serology, and Drug System 120/240v, single phase Computerized with keyboard and monitor, missing connection. (1) available
Stock Number: F-0113 2 Hp SHARPLES CENTRIFUGE OIL WATER SEPARATOR SHARPLES oil water separator centrifuge Type AE14VLDH/serial no.73-14-107 stainless steel bowl 150-200 GPH 2 Hp, 3490 rpm, 575 volt Powers up and spins freely, otherwise selling as is. (1) available
Stock Number: C-1408 8 INCH RO-TAP SIEVE SHAKER SCREENER Mfg. W. S. Tyler Inc, no. 12887 1/3 to 1/2 Hp motor to be added Comes with stainless steel sieves/screens 8 inch diameter platform (1) available
Stock Number: C-2241 Mfg. Vorti Siv. Looks like model RBF-10, s/n 10071 10 inch diameter x 1 inch with a cone bottom and lid 3/8 inch tri-clamp top in and bottom out 110v, single phase O/a 14 inch x 22 inch. No screen! Pharmaceutical use. (1) available
Stock Number: F-0145 24 inch TEFLON COATED BASKET CENTRIFUGE Centrifuge Teflon coated perforated basket XP controls, Hydraulic drive to belt 5 hp, 1740 rpm, 220/440 v, 3 ph, 60 hz, XP 3 inch bottom side outlet, assorted top inlets and sight glass Note: some of the coating is peeling (1) available
Stock Number: F-0178 24 INCH BARRETT CENTRIFUGE WRINGER/DRYER Mfg. Barrett Div of Kinefac Corp No. S-4021546WD, 1989 Takes a 24 inch diameter basket x 13 inch deep, not included 460 v, 3 ph. 600 rpm (1) available
Stock Number: F-0177 24 INCH BARRETT CENTRIFUGE WRINGER/DRYER Mfg. Barrett Div of Kinefac Corp No. S-11000493-WD, 1993 Takes a 24 inch diameter basket, 14 inch deep, not included 460 v, 3ph. 600 rpm (1) available
Stock Number: F-0157 30″ RUBBER LINED TOLHURST CENTRIFUGE Mfg. Tolhurst -Ametek No. TA-42481 30 inch diameter basket, 4 inch side outlet 500/1000 rpm basket, belt drive 3/1.5 Hp, 1745/885 rpm input, 230v, 3ph, 60hz Rated for 70 lbs./cu. ft. (1) available
Stock Number: F-0174 Mfg. Beckman Coulter Model J2-MI, no. NJB95A04, cat. no. 360321 100 to 2100 rpm, R404A refrigerant 208v (1) available
