4 x 16 inch CARBON STEEL BASKET FILTER 1.25 inch fittings

Stock no. C-2786 4 x 16 inch CARBON STEEL BASKET FILTER 1.25 inch fittings 3.5 x 11.5 inch stainless steel filter basket. 4.5 inch diameter x 16 inch housing 1.25 inch threaded side inlet , side outlet, bottom drain 1/4 inch top vent and (2) on the side, plus a 1/2 inch side out Clamped […]

7 x 28 inch 304L STAINLESS STEEL BASKET FILTER 2 inch fittings

Stock no. C-2780 7 x 28 inch 304L STAINLESS STEEL BASKET FILTER 2 inch fittings Parker model 9502-0020-UM/4LFB 12-2, serial no. 253468, yr. 2006 Rated for 151 psi @ 450 deg. F, 201 psi @ 100 deg. F and to -20 deg. F 7 x 28 inch stainless steel filter basket. 8 inch diameter x […]

7 x 28 inch ALUMINUM BASKET FILTER 1 inch fittings

Stock no. C-2778 7 x 28 inch ALUMINUM BASKET FILTER 1 inch fittings No plate 7 x 28 inch stainless steel filter basket. 8 1/4 inch diameter x 32 inch housing 1 inch side inlet and bottom outlet (2) 1/4 inch top fittings with vent and gauge. Legs/stand included Last used for BioDiesel (1) available

7 x 28 inch ALUMINUM BASKET FILTER 2 inch fittings

Stock no. C-2779 7 x 28 inch ALUMINUM BASKET FILTER 2 inch fittings No plate 7 x 28 inch stainless steel filter basket. 8 1/4 inch diameter x 32 inch housing 2 inch threaded > 1 inch side inlet and bottom outlet (2) 1/4 inch top fittings with vent and gauge. Legs/stand included Last used […]

7 x 28 inch CARBON STEEL BASKET FILTER 2 inch fittings ROSEDALE

Stock no. C-2776 (2) 7 x 28 inch CARBON STEEL BASKET FILTER 2 inch fittings ROSEDALE Products model M0813-2P-1-150-C-V-70V-P 7 x 28 inch stainless steel filter basket. 8 3/8 inch diameter x 38 inch housing 2 inch threaded > flange side inlet and bottom outlet 1/4 inch top vent and (2) on the side. 1 […]

STAINLESS STEEL ROTARY STRAINER WITH 4 INCH FLANGES

Stock no. C-2774 STAINLESS STEEL ROTARY STRAINER WITH 4 INCH FLANGES Compares to a Merco Dorr Oliver MRS model. ID plate is missing Housing is 10 inch diameter on the top and goes to 14 inch diameter It is 22 inch on the straight side and has a flat bolted top There is a dish […]

8.5 x 22.5 inch CUNO STAINLESS STEEL FILTER HOUSING 5.5 gallon

Stock no. C-2541 8.5 x 22.5 inch CUNO STAINLESS STEEL FILTER HOUSING 8.5 x 22.5 inch inside dimensions with clamped top 1.5 inch top inlet and outlet with a 1/4 inch drain There are no obstructions or brackets inside, smooth finish. Sell with or without stand (1) available

30 inch SANITARY 316 STAINLESS STEEL CARTRIDGE FILTER CODE 7

Stock no. C-2756 30 inch SANITARY 316 STAINLESS STEEL CARTRIDGE FILTER CODE 7 Millipore catalog no. CES6944-1, eq. no. FLT-2711 zwa, year 2001 Rated for 150 psi @ 275 deg. F/135 deg. C Takes a single 30 inch long code 7 type twist in filter Has 1.5 inch bottom inlet and outlet, ends have been […]

18 inch JACKETED SPARKLER STAINLESS STEEL PLATE FILTER

Stock no. C-1992 18 inch JACKETED SPARKLER STAINLESS STEEL HORIZONTAL PLATE FILTER Model 18 D 4, serial no. 22150, year 1984, certified by M & M Welding 1991 National Board no. 2089 Stainless steel rated for 60 psi, carbon steel jacket rated for 50 psi @ 350 F. 20 inch inside diameter x 12 inch […]

18 inch SPARKLER STAINLESS STEEL HORIZONTAL PLATE FILTER

Stock no. C-2751 18 inch SPARKLER STAINLESS STEEL HORIZONTAL PLATE FILTER Model 18 D 4 20 inch inside diameter x 10 inch deep, flat bottom, domed top 1 inch side inlet and outlet,  1/2 and 1/4 inch top fittings 1.25 inch bottom center outlet with 3/4 inch draw before outlet Priced complete with full charge! […]

20 inch x 12 cartridge PALL TRINITY SS CARTRIDGE FILTER

Stock no. C-2748 20 inch x 12 cartridge PALL TRINITY SS CARTRIDGE FILTER Mfg. is Pall Trinity Micro, part no. EWH1L122G49H13 Serial number 411F-N7867-4. Rated for 120 psi @ 32 to 100 deg. F Takes (12) 20 inch long slip in type cartridges. Water service only. 3 inch flanged inlet and outlets, 1/2 inch top […]

DONALDSON HIGH PURITY CARBON FILTER SYSTEM

Stock no. C-2744 DONALDSON HIGH PURITY CARBON FILTER SYSTEM Part no. P196160, replacement filter no. P196384 37 inch x 40 inch x 78 inch tall overall approximately 8 inch x 34 inch top inlet and outlet (1) available

4 x 13 inch STAINLESS STEEL BASKET FILTER STRAINER

Stock no. C-2711 4 x 13 inch STAINLESS STEEL BASKET FILTER STRAINER Manufacturer SSI Equipment INC. Serial no. 96-4676. model 150 BFSSBWOB. tag no. D-1279. year 1997 5 1/2 inch diameter X 16 inch tall, dished cover and dished bottom stainless steel. 2 inch side in and out. 3/4 inch out in lid and bottom drain […]

7 x 28 inch STAINLESS STEEL BASKET FILTER 2 inch fittings

Stock no. C-2317 (2) 7 x 28 inch STAINLESS STEEL BASKET FILTER 2 inch fittings Mechanical Mfg. Co. no. 24019 7 x 28 inch stainless steel filter basket. 9 inch diameter x 33 inch housing (1) 3/4 and (3) 1/4 inch NPT fittings, 2 inch 4-bolt flanged side in & out Legs/stand included rated to […]

18 inch SPARKLER 304 STAINLESS STEEL HORIZONTAL PLATE FILTER

Stock no. C-2205 18 inch SPARKLER  304 STAINLESS STEEL HORIZONTAL PLATE FILTER Model 18 D 12, NO. 10943. Jacketed Internal working pressure 60 psi, jacket rated for 14.5 psi carbon steel jacket.  3/4 inch jacket fittings Inlets and outlets  1/2 and 1/4 inch top fittings 1.5 inch side inlet and bottom center outlet Priced complete with […]

30 inch x 6 STAINLESS STEEL MULTI CARTRIDGE FILTER

Stock Number: C-2542 (2) 30 inch x 6 STAINLESS STEEL MULTI CARTRIDGE FILTER Mfg. Filterite Takes (6) 30 inch long type 222 fin cartridges Rated for 150 psi 1 inch inlets and outlets. 1/4 inch drain with valving (2) singles available and (1) pair on separate carts, see stock no. C-2547

30 inch x 7 STAINLESS STEEL MULTI CARTRIDGE FILTER

Stock no. C-2659 (2) 30 inch x 7 STAINLESS STEEL MULTI CARTRIDGE FILTER No mfg. tag. Takes (7) 30 inch slip in style cartridges 9 inch diameter x 33 inch with dished bottom & clamped top Polished stainless steel exterior with 316 stainless steel flanges Inside is coated but has peeled in a couple of […]

30 inch DUPLEX HYDRAULIC CARTRIDGE FILTER PHENOLIC IMPREGNATED

Stock no. C-2636 30 inch DUPLEX HYDRAULIC CARTRIDGE FILTER PHENOLIC IMPREGNATED Custom Service and Design Model 0C802363L026___-8004. Marked 2 elements @ 36 inch Uses HYDRAULIC 618/636 PHENOLIC IMPREGNATED CELLULOSE BLEND CARTRIDGES Rated for 150 psi @ 300 deg. F,  220 gpm nominal, 4.4 sq. ft. straining area each 2 inch in/out with valves to switch from one […]

15 gpm IonPure Deionization Module IP-LXM30HI-3

Stock no. C-2609 (2) 15 gpm IonPure Deionization Module IP-LXM30HI-3 IonPure Deionization Hot Water Sanitizable Module Model no. IP-LXM30HI-3 Rated for 600 v DC, 10 amps. 15 gpm nominal capacity, 7.5 gpm min, 22.5 gpm max Max. feed temperature is 140 deg F., 100 psi max. feed. Silica removal is typically up to 98%. Has […]

10 inch x 3 SANITARY STAINLESS STEEL CARTRIDGE FILTER

Stock no. C-2116 (3) 10 inch x (3) SANITARY STAINLESS STEEL CARTRIDGE FILTER Meissner  model HA1-03-106 takes 10 inch C7 type twist  filter cartridges 316 stainless steel 2.25 inch in and out threaded, 1/4 inch top threaded vent, 3/4 inch bottom drain 24 inch x 11 inch x 33 inch o/a (3) available

30 inch x 3 CARTRIDGE PALL 316 STAINLESS STEEL FILTER

Stock no. C-2588 30 inch x 3 CARTRIDGE PALL 316 STAINLESS STEEL FILTER HOUSING Pall Portsmouth div. of Pall Europe #08209101, yr 2008 p/n ALTA33G31SNH4, National Board 0800 150 psi @ 300 deg. F Takes (3) C7 type twist in cartridges up to 30 inch long 2 inch tri-clamp side in & out, 1.5 inch […]

5.5 x 13 inch ROSEDALE STAINLESS STEEL BASKET BAG FILTER

Stock no. C-2513 5.5 x 13 inch ROSEDALE STAINLESS STEEL BASKET BAG FILTER Model/serial no. C022423, mdl 6-12-1p-150-d-s-b-n-b, 6/5/89 Manufacturer ROSEDALE Takes a 5.5 x 13 inch basket, housing 5 5/8 x 17.5 inch Stainless steel rated for 150 psi, single pass 1.25 inch threaded side in and bottom out Adjustable legs. MISSING BASKET***

4 gpm VAPONICS REVERSE OSMOSIS FILTER

Stock no. C-2523 4 gpm VAPONICS REVERSE OSMOSIS FILTER Model/serial no. 91-a23144A, model 19cvf-hr(pa)6000/ecn-sp Manufacturer Vaponics Div. Of Osmonics stainless STEEL contactS final pressure 235 psi, primary pressure 140 psi (4) 4 inch x 4 ft. ss filter housings, auto /manual controls RO divert pane, level control panel SB 1816x-12200-n Tonkaflo pump 115v control, 208-230/460 […]

1 inch PALL FILTRON MAXIMATE TANGENTIAL FLOW FILTER

Stock Number: C-2469 1 inch PALL FILTRON MAXIMATE TANGENTIAL FLOW FILTER Mfg. Pall Filtration Maximate Tangential Flow Cassettes, no. 22074.01 (2) 1 inch and (2) 1/2 inch tri-clamp inlets and outlets Membranes measure 2.5 inch x 13 inch x 1 inch thick Overall measurements 14 inch x 7 inch x 14.25 inch (1) available

4 inch X 12 inch STAINLESS STEEL BASKET BAG FILTER

Stock Number: C-2211 4 inch X 12 inch STAINLESS STEEL BASKET BAG FILTER Mfg. Ronningen-Petter, serial nos. S06148 and S06149 Rated for 300 psi @ 220 deg. F Twin 316L ss housings 2 inch inlet and outlet, 4.5 x 12 inch baskets Will clean before shipping. Selling as pair! MISSING BASKETS (1) available

7.5 CU. FT. SHRIVER FILTER PRESS 630 mm

Stock Number: C-1507 7.5 CU. FT. SHRIVER FILTER PRESS 630 mm Mfg. SHRIVER/ENVIROTECH CORP s/n 27257 with Recessed filter plate conversion 7.5 cu.ft. capacity, 630 mm plates 2 ft. x 5 ft. filter area (25) recessed non-gasketed poly plates Reduced price! Conversion plate is missing! As an option we have a JWI 630 mm frame […]

12 inch diameter STAINLESS STEEL FUNDA FILTER

Stock Number: C-1866 12 inch diameter STAINLESS STEEL FUNDA FILTER Mfg. Chemap, Inc. S/n 483-0.2-02.64. 16/50/61/5, 200 max 12 in. x 12 in, coned bottom, clamped dished top 30 gallon pre-coat tank has 6-loop coil 3 hp pump, 1755 rpm, 230/460v, 3ph Stainless steel w/carbon steel jacket, skid mounted (1) available

WATER FILTRATION SYSTEM 40 60 gallon LINED TANKS PUMP

Stock Number: C-2336 WATER FILTRATION SYSTEM with LINED TANKS and PUMP Water Filtration System Lined Tanks used for water filtration. It also has a G & L circulating pump. 1 inch inlets and outlets. 1 inch drain. Side sight glass Tanks are 16 inch diameter, (1) 4 ft. and (1) 6 ft, approx. 40 and […]

20 inch x 4 PALL STAINLESS STEEL MULTI CARTRIDGE FILTER

Stock Number: C-2010 20 inch PALL STAINLESS STEEL MULTI CARTRIDGE FILTER Mfg. Pall Trinity, p/n SANNS-08-G31 Rated for 100 psi @ 300 F Sanitary stainless steel 9 inch x 20 inch stainless steel housing Clamped dish bottom and clamped dish top Takes (4) CODE 7 twist in type cartridges 2 inch Tri-clamp side, top, and […]

20 HP ULTRA FILTRATION SYSTEM US FILTERS

Stock Number: C-1757 20 HP ULTRA FILTRATION SYSTEM US FILTERS Mfg. Permutit / US Filters Job A111D75535 (12) 4 inch x 13 ft PVC tubes, (1)tube needs replacing Goulds Mdl 3333,size GB4510031023LB pump 20 hp, 3510 rpm, 230/460v, 3ph, 60hz O/a 14 ft 4 inch x 56 inch x 78 inch. WILL SEPARATE! (1) available

20″ x 3 BALSTON STAINLESS STEEL CARTRIDGE FILTER

Stock Number: C-2243 20″ x (3) BALSTON STAINLESS STEEL CARTRIDGE FILTER Mfg. Balston Filter AC-0395-30 6.5 inch diameter x 25 inch, dish top and bottom rated for 2 Torr vacuum 1.5 inch in and out, (3) 1/2 inch fittings Takes (3) 20 inch filters. (1) available

20 inch x 7 cartridge 316 STAINLESS STEEL FILTER US FILTER

Stock No. C-2287 (2) 20 inch x 7 cartridge 316 STAINLESS STEEL FILTER US FILTER Mfg. US Filters, takes (7) slip in type cartridges Model T910596-300, Type 14MEGA+2-2 Rated for 150 psi @ 200 deg. F 9 inch diameter x 26 inch with dished bottom Clamped dished top, 2 inch side in & out 3/4 […]

50 GALLON STAINLESS STEEL NEUTSCH TYPE FILTER

Stock Number: C-1749 22 inch diameter x 31 inch on a 24 x 28 inch cart Fine screen, coarse screen, and bottom grate 1 inch bottom center to side outlet Housing clamps to bottom, open top (1) available

75 cu. ft. 1200 mm NETZSCH FILTER PRESS RECESSED PLATES

Stock Number: C-CD01 75 cu. ft. 1200 mm NETZSCH FILTER PRESS RECESSED PLATES Mfg. Netzsch Model 1200/61-67, 1984 75 cu. ft. capacity, 1200 mm (65) recessed non-gasketed poly plates, 6 in. center feed Automatic electric/hydraulic. 3 ph Manual on hand. Complete! (2) available

1200 MM RECESSED GASKETED FILTER PRESS PLATES

1,200 MM  RECESSED GASKETED FILTER PRESS PLATES Stock No. C-2158 Recessed and gasketed 1200 mm poly filter plates, 47 inch square (33) recessed and gasketed poly plates, (29) with spickets (4) 2 inch corner in and out came from a Sperry Filter Press Will consider selling individually (33) available

658 GALLON FIBERGLASS FILTER TANK with MANIFOLD

Stock Number: A-1952 (2) 658 GALLON FIBERGLASS FILTER TANK with MANIFOLD 4 ft. diameter x 7 ft. with 10 inch domed lid top manway, 3 inch top inlet 2.5 inch side inlet & outlet, (2)2 inch side outlets Has packed internals with PVC manifold (2) available

200 gallon FIBERGLASS REINFORCED POLY PRESSURE FILTER TANK 

Stock Number: E-3715 200 gallon FIBERGLASS REINFORCED POLY PRESSURE FILTER TANK Mfg. Pentair , Structural North America 28 inch diameter x 54 inch + dished top & bottom Rated for 150 psi @ 150 deg. F 1.5 inch in and out. O/a 30 inch diameter x 84 inch tall For water filtration. Has filter media. […]

80 GALLON CHARCOAL RESIN FILTER TANK

Stock Number: C-1620 80 GALLON CHARCOAL RESIN FILTER TANK Mfg. Penfield Co. 80 gallon capacity 20 inch x 58 inch with 3 inch dished bottom Bolted top, 1 inch dished. 2 inch side sight glass 2 inch side inlet and outlet, 1 and 3/4 inch top fittings Carbon steel with lining Used in water filtration […]

100 gallon X 2 LINED FILTER TANKS

Stock Number: A-1868 100 gallon X 2 LINED FILTER TANKS Mfg. ILLINOIS WATER TREATMENT (2) 20 inch diameter x 6 ft with flat bottom, dished top Carbon steel and Koroseal lined Last used for water filtration Will sell together or separate. (2) available

150 GALLON LINED PRESSURE TANK 100 psi

Stock Number: G-1515 150 GALLON LINED PRESSURE TANK 100 psi Mfg. Penfield Inc., Model DA24072-S Certified by West Warwick Welding Inc. National Board no. 3216, sn 10213 Rated for 100 psi @ 250 deg.F and -20 deg. F Carbon steel with lining for water treatment system 6 x 8 inch port, 2.5 inch top & […]

188 GALLON LINED FILTER TANK

Stock Number: A-1869 188 GALLON LINED FILTER TANK Mfg. ILLINOIS WATER TREATMENT 2 ft. diameter x 8 ft. with flat bottom, dished top Tanks are carbon steel and lined Used for water filtration (3) available

264 GALLON LINED FILTER TANK

Stock Number: A-1866 264 GALLON LINED FILTER TANK Mfg. ILLINOIS WATER TREATMENT 3 ft. diameter x 5 ft with flat bottom, dished top Carbon steel and lined Last used for water filtration 12 x 15 inch top manway, 3.5 inch side out 3 inch top inlet and bottom center outlet (1) available