BUSCH STANDING FILTER HOUSING VSSAP100/3

Stock no. C-2765 (2)

BUSCH STANDING FILTER HOUSING VSSAP100/3
Code 1FM106-1491-0102(3 on 2nd), Element GB100-64, carbon steel construction
12 inch diameter x 24 inch deep, flat bottom and clamped flat top
(2) 1.5 inch flanged side fittings
Several side threaded fittings, (2) 1.25 inch and (4) 1/2 inch, 4.5 x 6 inch clean-out
Mounted on a 18 x 21 inch cart. 37 inch overall height
(2) available. Additional information from the manufacturer here below:

Original Busch standing filters combine different separation mechanisms in a multi-stage process.

The standing filter housing is designed as a cyclone in the area of the gas inlet (1). The tangential gas inlet and deflection cone allow the gas or vapor to flow along the inside of the vessel. Coarse particles and liquids are separated at this stage.

After passing through the filter insert, the cleaned gas or steam leaves the standing filter through the gas outlet (2).

A large opening (3) ensures easy access to the filter insert.

The collected condensate can be drained off via the condensate drain (4).

The condensate collection chamber can be cleaned via the cleaning opening (5).

Posted in -NEW ARRIVALS, Filters.