Stock no. P-3104 2 x 2.5 inch VIKING GEAR PUMP BRONZE Model K124, no. 1090891 with a packed seal 2 inch top and 2.5 inch side threaded fittings with tri-clamp adapters Has a 1/2 inch top fitting with a valve 1.5 Hp Induction Gear Motor 116 rpm output, 230/460 volt, 3 ph Last used for […]
Stock no. P-3031 2.5 inch WAUKESHA 60 STAINLESS STEEL DISPLACEMENT PUMP Model 060, serial no. 291201-01 2.5 inch sanitary tri-clamp fittings Will sell with or without motor setup (1) available
Stock no. P-3076 3 inch WAUKESHA STAINLESS STEEL DISPLACEMENT PUMP Model 130 , no. 161132 95 3 inch I line tri-clamp in and out Will sell pump alone or with motor setup (1) available
Stock no. P-3075 4 inch WAUKESHA STAINLESS STEEL DISPLACEMENT PUMP Model 220 U2 , no. 1000002456461, 2010 4 inch I line tri-clamp in and out Will sell pump alone or with motor setup (1) available
Stock no. P-3097 4 x 11 >3 inch WAUKESHA STAINLESS STEEL DISPLACEMENT PUMP No.00-113174-1-1-R1 stamped in head. No plate, compares to model 224. Model 224 is rated for 0.522 gal/rev., to 300 gpm 4 inch x 11 inch rectangular inlet, 3 inch tri-clamp outlet Has gear box attached. (1) available
Stock no. P-2854 (3) 3 inch STAINLESS STEEL PROGRESSIVE CAVITY PUMP Tarby model 1-1TL6 SSW 026 Rated for 5 to 47 gpm and up to 225 psi 3 Hp, 1720 rpm to gear reducer, 230/460 volt, 3 ph (3) similar available (2) with stainless steel barrels
Stock Number: P-2828 (4) 1.5 inch WAUKESHA STAINLESS STEEL DISPLACEMENT PUMP 25 Waukesha Industrial model 25, serial no. I 1825SS 1.5 inch threaded in and out Stainless steel contacts Will sell pump only or with motor setup (4) similar available
Stock Number: P-3099 (2) 1.5 inch WAUKESHA STAINLESS STEEL DISPLACEMENT PUMP 25 Waukesha Industrial model 25I, serial no. 84719SS 1.5 inch threaded in and out Stainless steel contacts, mechanical seals Will sell pump only or with motor setup (2) similar available
Stock no. P-3072 (3) 1.5 inch WAUKESHA STAINLESS STEEL DISPLACEMENT PUMP Model 015 U1, no. 1000002754992, year 2012 Has 1.5 inch threaded inlet and outlet Will sell with or without motor and gear reducer setup (3) similar available
Stock no. P-3073 (4) 1.5 inch WAUKESHA STAINLESS STEEL DISPLACEMENT PUMP Model 030, no. 305467 02 1.5 inch threaded in and out Front cover not shown is included Will sell pump only or with motor setup (4)like this available
Stock no. P-3095 3 inch WAUKESHA STAINLESS STEEL DISPLACEMENT PUMP Model 130, no. 165652 95 Has 3 inch 8-bolt flanges, stainless steel rotors (1) available
Stock no. P-3096 6 inch FRISTHAM STAINLESS STEEL DISPLACEMENT PUMP Model FKL400, no. FKL4001002589 Rated for 600 rpm max, to 300 psi 6 inch 12 bolt flanged in and out Stainless steel rotors (1) available
Stock no. P-2972 3 inch WAUKESHA STAINLESS STEEL DISPLACEMENT PUMP 201U Waukesha model 201U, no. 0000245826 3 inch threaded outlet, 3 x 9 inch rectangular inlet Will sell with or without a motor setup (1) available
Stock no. P-3061 1.5 inch MODEL 030U2 WAUKESHA STAINLESS STEEL DISPLACEMENT PUMP Model 030U2AP, No. 158869-04 1.5 inch tri-clamp type fittings 5 Hp, 1725 rpm, 230/460 v, 3 ph Gear reduced approx. 600 rpm output Being reconditioned and soon to be ready to go. (1) available
Stock no. P-3060 3.5 inch WAUKESHA STAINLESS STEEL DISPLACEMENT PUMP Model 130U2LC, no. 380058 3.5 inch tri-clamp in and out Sell with or without a motor and gear reducer setup (1) available
Stock no. P-3059 4 inch WAUKESHA STAINLESS STEEL DISPLACEMENT PUMP Model 220, no. 2309064R1 09 4 inch tri-clamp in and out 7.5 Hp, 1175 rpm, 230/460 v, 3 ph Waukesha model 239 gear reducer with 9.01-1 ratio (1) available
Stock no. P-2837 2.25 inch VIKING GEAR PUMP L4125 CAST IRON Model L4125R, no. B-1263 2.25 inch threaded inlet and outlet 10 Hp, 1760 rpm, 460 volt (can change if needed) Gear reducer, relief valve 135 gpm @ 640 rpm nominal rating (actual speed may be different) Will reconnect motor and test prior to shipping […]
Stock no. P-3034 3 inch SINE STAINLESS STEEL DISPLACEMENT PUMP Sine model MR 135 NNTC, serial number 130680507 Approx. 5 Hp, 1760 rpm, 230/460 volt, 3 ph gear reduced 3 inch tri-clamp in and out Recently refurbished and ready to go. (1) available
Stock no. P-3043 3 inch WAUKESHA STAINLESS STEEL DISPLACEMENT PUMP Waukesha model 130, no. 11699 3 inch threaded in and out Will sell with or without a motor setup
Stock no. P-3049 2.5 inch WAUKESHA 60 STAINLESS STEEL DISPLACEMENT PUMP Model 060, serial no. 17299 2.5 inch sanitary tri-clamp fittings 3 Hp, 1680 rpm, 230/460 volt, 3 phase motor 8.9-1 ratio on gear reducer with variable speed control Mounted on stainless steel platform (1) available
Stock no. P-2840 2 inch G & H STAINLESS STEEL GEAR PUMP Manufacturer G & H Pump Div. Of Alfa Laval Corp. Model GHS 2 GJ 9-B-00007, s/n 10615607 2 inch threaded inlet and outlet 2 hp, 1740 rpm, 3 ph, 208-230/460 volt, 9-30 amp Gear reduced (1) available
Stock no. P-2838 1.5 inch STAINLESS STEEL DISPLACEMENT PUMP TUTHILL TUTHILL (CHICAGO). Serial no. 04-0309-10, model 16-s.s, 25526 Stainless steel 1.5 inch threaded in and out 1.5 hp, 1165 rpm, 3 ph,230/460 volt, 5.7-2.8 amp Compares in size to a Waukesha model 15, with Bat wing type rotors (1) available
Stock no. P-2971 (11) 3 inch WAUKESHA STAINLESS STEEL DISPLACEMENT PUMP Model 130, serial no. 218399 98 3 inch I line type tri-clamp fittings Will sell with or without motor and gear reducer setup (11) similar available
Stock no. P-2973 3″ WAUKESHA STAINLESS STEEL DISPLACEMENT PUMP JACKETED Missing plate but may be a model 130 with a jacketed head Serial number 363044 3″ tri-clamp fittings Will sell pump only or setup with a motor and gear reducer (1) available
Stock no. P-2983 (2) 2.5 inch 316 STAINLESS STEEL VIKING GEAR PUMP L4724 jacketed Viking Pump, Inc., s/n 11310146, model L4724 2.5 inch threaded fittings and this one has adapters to 3 inch flanges. Has jacketed housing 90 gpm @ 420 rpm 200 psi @ 300 deg F nominal rating 7.5 hp, 1165 rpm, 230/460 […]
Stock no. P-2981 1.5″ CREPACO STAINLESS STEEL DISPLACEMENT PUMP R3R Creamery Package Company Model R3R, no. B-6599, with Resilient type rotors 1.5″ threaded dairy type fittings Sell pump alone or with motor setup (1) available
Stock no. P-2980 1.5″ SIZE 3 CREPACO STAINLESS STEEL DISPLACEMENT PUMP Creamery Package Company No. 3R-4919. with Resilient type rotors 1.5″ threaded dairy type fittings Sell pump alone or with motor setup (1) available
Stock no. P-2979 1.5 inch MODEL 030 WAUKESHA STAINLESS STEEL DISPLACEMENT PUMP No. 282589 01 1.5 inch threaded dairy type fittings Sell pump alone or with motor setup (1) available
Stock no. P-2978 (2) 3″ WAUKESHA 060U2 STAINLESS STEEL DISPLACEMENT PUMP Model 060 U2, s/n 321999-02 with 3″ 4-bolt flanged fittings Set up with a 10 Hp, belt drive motor mounted on a steel base 1165 rpm, 230/460 v, 3 ph, 60 hz Will sell with or without current setup. Can also modify the base. […]
Stock no. P-2966 (3) 6″ WAUKESHA STAINLESS STEEL DISPLACEMENT PUMP Model 320U2 6″ 8-bolt flanges Sell pump alone or with a motor and gear reducer setup Originally with a 25 Hp drive setup (3) available
Stock no. P-2902 2.5″ MOYNO STAINLESS STEEL PROGRESSIVE CAVITY PUMP Manufacturer ROBBINS & MYERS MOYNO, trim AAA, 1L4 frame, type SSQ, form GC, s/n m85 329-9 Stainless Steel construction 2.5″ inlet and outlet 3 hp, 1735 rpm, 230/460 volt rated 5 gpm to 20 gpm 1/3 to 1.5 Hp to 75 psi higher Hp on this […]
Stock Number: P-2897 3 inch SANITARY STAINLESS STEEL PROGRESSIVE CAVITY PUMP Mfg. Moyno Robbins and Meyers Numbers stamped on pump AN20965, 4250411, 102, 11-7-99 3″ tri-clamp fittings 10/7.5 Hp, 1750/1450 rpm, 208-230v, 3ph From food plant (1) available
Stock no. P-2925 1.5″ WAUKESHA STAINLESS STEEL DISPLACEMENT PUMP Model 030 U2, no. 1000002306701 Has 1.5″ inlet and outlet I line sanitary fittings Will sell with or without motor and gear reducer setup Have several drive options including a 3 Hp varidrive to 487 rpm output. (1) available
Stock no. P-3100 (7) 1 inch WAUKESHA STAINLESS STEEL DISPLACEMENT PUMP Model 006 U1, no. 1000002945321, year 2014 Has 1 inch id fittings with 1.5 inch threaded inlet and outlet Will sell with or without motor and gear reducer setup (7) available
Stock no. P-3071 (9) 1.5 inch WAUKESHA STAINLESS STEEL DISPLACEMENT PUMP Model 018 U1, no. 1000002612180, year 2011 Has 1.5 inch threaded inlet and outlet Will sell with or without motor and gear reducer setup (9) similar available
Stock no. P-2926 1.75 inch WAUKESHA STAINLESS STEEL DISPLACEMENT PUMP Model 040-08, no. 1000002111381 Has 1.75 inch id inlet and outlet with 3 inch I line sanitary fittings Will sell with or without motor and gear reducer setup (1) available
Stock no. P-2899 2.5″ WAUKESHA STAINLESS STEEL DISPLACEMENT PUMP w/RELIEF VALVE Model 60, no. 445072-07 2.5″ tri-clamp in and out. Has relief valve Sell with or without a motor and gear reducer setup Several similar pumps available
Stock no. P-2900 3″ WAUKESHA SANITARY STAINLESS STEEL DISPLACEMENT PUMP Model 130, no. 24602831-10 With 3″ tri-clamp in and out Will sell with or without motor and gear reducer setup Other similar pumps available
Stock no. P-2905 2.5″ WAUKESHA SANITARY STAINLESS STEEL DISPLACEMENT PUMP Model 60, no. 374059-05 2.5″ tri-clamp in and out Sell with or without a motor and gear reducer setup Several similar pumps available
Stock no. P-2887 2.5″ STAINLESS STEEL DISPLACEMENT PUMP WAUKESHA 060 U1 Manufacturer WAUKESHA CHERRY-BURRELL Model 060 U1, serial no. 09/21112 Inlets/outlets (2) 2.5″ tri-clamp in and out Overall with cart 21″ x 39″ x 24″ Sell with or without motor (1) available
Stock no. P-2834 (2) 1.5″ VIKING STAINLESS STEEL DISPLACEMENT PUMP Model S2S rated for 6 gpm, 150 psi Has 1.5″ tri-clamp in and out. 2 Hp, 1725 rpm, 208-230/460 v, 3ph (2) available There are also (2) of the heat exchangers pictured available more info to follow
Stock no. P-2832 1″ VIKING STAINLESS STEEL DISPLACEMENT PUMP Model S1S 1″ tri-clamp in and out Rated to 12 gpm, 56 psig 2 Hp, 1165 rpm, 230/460 v (1) available
Stock no. P-1951 1 inch STAINLESS STEEL WAUKESHA DISPLACEMENT PUMP model 03 Model 03, no. D041000SS. Sanitary use 1 inch in and out with sanitary threads and tri-clamp adapters Will sell with or without motor setup (1) available
Stock no. P-2809 2.5″ Waukesha model 060 Stainless Steel sanitary displacement pump S/n 364249 04 2.5″ tri-clamp in and out Half moon type rotors. Gear box and motor (not pictured) included. From a food plant (1) available
Stock no. P-2794 2″ VIKING STAINLESS STEEL GEAR PUMP Model KK4127A, no. 10800175 2″ in and out Mechanical seal, relief valve Rated for approx. 50 gpm @ 420 rpm Sell with or without motor and gear reducer (1) available
Stock no. P-2788 3″ APV SANITARY STAINLESS STEEL DISPLACEMENT PUMP Type DW5/093/025, no. 10002079, 27128028 3″ tri-clamp in and out Rated for 24.6 gallons per 100 rpm, 25 bar/362 psi Aseptic positive displacement lobe pump (1) available
Stock no. P-2456 Netzsch stainless steel progressive cavity pump Model 2NL20A with 1.5″ x 2″ tri-clamp fittings .84 gal/100 rpm, up to 7.2 gpm. 60 to 180 psi 1.5 Hp, 230/460v, 3ph. Last used for paper coatings. (1) available
Stock no. P-2457 Robbins Myers Moyno stainless steel progressive cavity pump Model 2L6 SSQ DAA , s/n A539640-1 2″ outlet, 3″ inlet, 316 stainless steel, Buna N synthetic rubber Rated up to 40 gpm and up to 150 psi (1) available
Stock no. P-2762 Moyno Stainless steel self-priming progressive cavity pump General utility pump model 35 00 489 707 1.5 Hp, 1725 rpm, 208-230/460v, 3ph 1.5″ in and out (1) available
Stock no. P-2772 1.5 inch WAUKESHA STAINLESS STEEL DISPLACEMENT PUMP Model 030, no. 145102 1.5 inch threaded in and out 3 Hp, 1725 rpm gear reduced with digital speed control 208-230/460 v, 3ph (1) available
Stock no. P-2779 Viking model K4724 316 stainless steel gear pump 3″ flanged in and out. Jacketed housing, relief valve Model no. indicates mechanical seal Will sell bare pump or setup with a 2 to 5 Hp motor and gear reducer. (2) available
Stock no. P-2572 1 ” sanitary STAINLESS STEEL DISPLACEMENT PUMP Size 300, #0098 UniBloc Manufacturer Flowtech Sanitary stainless steel Rated for 2.8 gal/per/rev, 28 gpm max. 1″ id tri-clamp in & out Includes base to be mounted on, cart is an option Priced with motor setup but not exactly as pictured
Stock no. P-2717 1 inch VIKING SS DISPLACEMENT PUMP Model/serial no. LC20s, 107067/a/96 Manufacturer Viking Pump, Inc. Construction/configuration stainless steel Inlets/outlets 1″ flanged in & out General data will sell with or without motor setup (1)available
Stock no. P-2725 3″ MODEL 130 WAUKESHA SS DISPLACEMENT PUMP Model 130 s/n 251629-99 Sanitary stainless steel 3″ tri-clamp inlet and outlet sell with or without motor setup (1)available
Stock no. P-2711 1.5″ model 30 WAUKESHA SS JACKETED DISPLACEMENT PUMP Model/serial no. 157817, model 30 Manufacturer WAUKESHA CHERRY-BURRELL Construction/configuration stainless steel jacketed Inlets/outlets 1.5″ tri-clamp in/out, jacketed in/out Motor 2 hp,1725 rpm Drive gear reducer Electrical data 208-230/460 volt, 6.5-6.3 amp, 3 ph (1)available
Stock no. P-2647 Model/serial no. size 60, s/n 181674 96 Manufacturer WAUKESHA CHERRY-BURRELL Construction/configuration stainless steel jacketed housing Inlets/outlets .5″ jkt i/o, 2.5″ threaded fittings Motor 1755 rpm, 5 hp Electrical data 3 ph 230 v (1)available
Stock no. P-2648 2 inch WAUKESHA STAINLESS STEEL DISPLACEMENT PUMP 1250 WAUKESHA CHERRY-BURRELL Model 1250 Sanitary stainless steel Inlets/outlets (4) 2 inch tri-clamp in/out 5 hp, 1725 rpm, 208 volt, 3 ph (1)available
Stock no. P-2627 3″ MODEL 130 WAUKESHA SS DISPLACEMENT PUMP Serial no. 14605, model 130 stamped R1-2 Sanitary stainless steel 3″ threaded with tri-clamp adapters 7.5 Hp varidrive, 1740 rpm input, 70 to 350 rpm output 230/460 v, 3ph shipping weight on pallet is 1080 lbs. (1)available
Stock Number: P-0034 Mfg. Moyno div. of Robins & Myers Type SSQ, Frame 2L2 1/3 Hp, 1725 rpm, 230/460v, 3ph, belt drive 1 inch inlet and outlet 316 Stainless Steel (1) available
Stock Number: P-1983 1.5 inch WAUKESHA STAINLESS STEEL DISPLACEMENT PUMP 250 Mfg. Waukesha Model 250, stainless steel with 2 lobe resilient rotors 1.5 inch in and out with 2 inch tri-clamp adapters 1.5 Hp varidrive, 33 to 300 rpm output 230/460v, 3ph (1) available
Stock Number: P-2025 1.5 INCH UNIBLOC STAINLESS STEEL DISPLACEMENT PUMP Flowtech Unibloc ss displacement pump Model Labtop 350, no. 3987 1.5 inch tri-clamp in and out, 316 Sanitary Stainless steel 15 amp, 115v, speed control with reverse Pump and motor works. Problem with digital controls. Can setup with motor and gear reducer. (1) available
Stock Number: P-1256 Mfg. Viking Pump Model H724 2 Hp, 1750 rpm, 230/460v Viking gear reducer no. 3-551-002-340 316 Stainless Steel, packed seal, jacketed shaft housing (2) available
Stock Number: P-2055 Mfg. Albin Pump div. of IDEX Corp. Model SLP 110 1.5 inch tri-clamp in and out With or without motor setup 87 psi @ 234 deg. F (1) available
Stock Number: P-2341 Mfg. Viking Pump Model HL124a Nominal rating 30 gpm @ 1800 rpm, to 400 psi 7500 ssu, to 300 deg. F. Packed seal 1.5 inch in and out cast iron construction. (1) available
Stock Number: P-2484 1.5 X 2 INCH STAINLESS STEEL PROGRESSIVE CAVITY PUMP Continental stainless steel progressive cavity pump Ultra Pump 3C14SS1, CL2097 1.5 x 2 inch in/out Sell with or without motor setup (1) available
Stock Number: P-2382 (2) 1.5 INCH WAUKESHA STAINLESS STEEL DISPLACEMENT PUMP Waukesha model 30 SS Displacement Pump 1.5 inch tri-clamp in and out Currently with hydraulic motor Can convert to electric Relief valve, mechanical seals We have 2 similar setups with threaded fittings (2) available
Stock Number: P-1908 1.5 inch WAUKESHA STAINLESS STEEL DISPLACEMENT PUMP 25 Waukesha Industrial model 25 SS Displacement Pump 1.5 inch threaded in and out Stainless steel contacts 3/4 Hp gear motor, 155 rpm output, 230v, 3ph, 1140 rpm in (1) available
Stock Number: P-1900 Mfg. Waukesha Model 55 DI, Ductile Iron Rated for up to 90 gpm, 200 psi 2 inch threaded inlet and outlet Can take 2 to 7.5 Hp motor (1) available
Stock Number: P-1994 Mfg. Viking Model K124 Carbon steel construction, 2 x 3 inch in/out 5 Hp, 1160rpm motor with gear reducer 230/460v, 3ph, 60hz (6) available
Stock Number: P-1873 Mfg. Lobeflo Pump div of Alfa Laval Type SR-3-038-1S-3A 1.5 inch in and out Will sell with or without motor setup Industrial use! Typical curve on file. (1) available
Stock Number: P-1303 Mfg. Viking Pump Model L124 and L125 available. 2 x 2 inch threaded in and out 1 Hp, 1745 rpm, 208-230/460v Cast iron. Packed seal, gear reduced to chain drive. (6) available
Stock Number: P-1446 Mfg. Viking Pump Model 12LQ 5 Hp, 1725 rpm, 230/460v, 3ph belt drive to Falk gear reducer 2 inch threaded in and out Packed seal (1) available
Stock Number: P-1123 Mfg. Robbins & Myers – Moyno Frame 2L4, type SSB, trim DAA Stainless steel, chrome plated rotor, jacketed housing 2 inch in & out 1 Hp gearmotor, 1755 rpm, 2.7 ratio, 230/460v, 3ph Rated to 21 gpm, mechanical seal (1) available
Stock No. P-2626 1.5 INCH WAUKESHA STAINLESS STEEL DISPLACEMENT PUMP Waukesha model 30 Sanitary Stainless Steel Displacement Pump 3 Hp, 1725 rpm, 230/460 v, 3ph 6:1 ratio gear reducer 1.5 inch tri-clamp in & out Stainless steel rotors (1) available
Stock Number: P-1423 Viking cast iron 2.5 inch gear pump Model 12LQ 10 Hp, 1155 rpm belt drive, 230/460v, 3ph 2.5 inch flanged in and out Nominal rating for this pump 135 gpm at 640 rpm Used for grease/oils (2) available
Stock Number: P-1419 Viking 2.5 inch cast iron gear pump Model LQ124R 5 Hp, 1170 rpm to gear reducer, 7.65 ratio 230/460v, 3ph Packed seal. Nominal 135 gpm @ 640 rpm Last used for grease/oils (4) available
Stock Number: P-1466 Viking 2.5 inch cast iron gear pump Model L125 5 Hp, 1165 rpm, 230/460v, 3ph Viking gear reducer no. 3-551-007-765-EI 2.5 inch flanged in and out Packed seal. Last used for grease/oils (1) available
Stock Number: P-2054 Mfg. Johnson Pump Model 325 2.5 inch tri-clamp in and out Sell with or without motor setup (1) available
Stock Number: P-2282 2.5 inch SANITARY STAINLESS STEEL PROGRESSIVE CAVITY PUMP Mfg. Moyno Robbins and Meyers Model 2F GC4 SSE SAA 2.5 inch tri-clamp fittings 2 Hp, 208-230/460v, 3ph rated up to 20 gpm and up to 150 psi (1) available
Stock Number: P-2339 2.5 inch VIKING GEAR PUMP CAST IRON AK4195 Mfg. Viking Pump Model AK4195 Nominal rating 50 gpm @ 1200 rpm, to 100 psi 5 Hp, 1160 rpm, 230/460v, 3ph 2.5 inch in & out. Relief valve, mechanical seal Cast iron construction. (1) available
Stock Number: P-0925 Mfg. Netzsch Inc. Model 2NE50, no. 305670, 112561 3 inch in and out. Stainless Steel contacts. Rated for 12 gal per 100 rpm up to 108 gpm .70 inch max particle size Can take 2 to 15 Hp and priced depends on Hp needed (1) available
Stock Number: P-0529 Mfg. Moyno div. of Robins & Myers Frame 12P3, Type SXQ/AAE, Form LH Rated for .86 gal per 100 rpm, 900 psi, 12 stage 17-4 PH internals and oversize rotor 7.5 Hp, 1760 rpm, 230/460v 3 inch in and out, Stainless Steel contacts. (6) available
Stock Number: P-0502 Mfg. Netzsch Inc. Type 8NE20A, job no. 301752 Rated for .84 gal per 100 rpm, 720 psi, 8 stage 3 inch in and out. Stainless Steel contacts 5 Hp, 1750 rpm, 230/460v (6) available
Stock Number: P-2194 Looks like Moyno, but no id plate 3 inch inlet x 2.5 inch outlet Stainless steel contacts Can setup with approx. 2 to 5 Hp motor (1) available
Stock Number: P-2591 Waukesha 3 inch SS Displacement Pump Model 130, no. 190874 SS 3 inch tri-clamp in & out Will sell with or without motor setup (1) available
Stock Number: P-2145 Mfg. Roper Possibly model 71219 (plate is missing) 10 Hp, 1750 rpm, 230/460v, 3ph Carbon Steel Shell, Stainless Steel shaft 6 inch inlet x 5 inch out reduced to 3 x 3 inch (1) available
Stock Number: P-2159 Mfg. Moyno div. of Robins & Myers GSA-23879, Frame 2FOGS1-CDQ, Trim AAA 6 x 5.5 inch in & out, Stainless steel! Rated for 25 to 175 gpm, 1-20 Hp, to 450 psi Sell as is or with motor setup Price determined by Hp needed. (1) available
Stock Number: P-2483 Moyno stainless steel progressive cavity pump Mfg. Robbins & Myers, 2EO22G1, SSQ3 DAA, yr 2000 4 x 6 inch in/out Sell with or without motor setup (1) available
Stock Number: P-2485 6 X 6 INCH MOYNO SS PROGRESSIVE CAVITY PUMP Moyno stainless steel progressive cavity pump Mfg. Robbins & Myers 2F050GFSSA DAX, AS8685499 BH 6 x 6 inch in/out Will sell with or without motor setup (1) available
Stock Number: P-2486 Moyno stainless steel progressive cavity pump Mfg. Robbins & Myers 2ED22GLSSC, DAA, AS8746291.2 6 x 4.5 inch in/out Sell with or without motor setup (1) available
Stock Number: P-0658 8″ MOYNO PROGRESSIVE CAVITY PUMP Mfg. Moyno div. of Robins & Myers Type CDQ, Frame 1L12H, Form EB 8 inch top inlet, 6 inch side outlet Rated for 18 to 382 gpm (3) available
