Stock no. B-4537 16 Hp rated Ingersoll Rand Piston Air Motor Model MMP150-D0A2A, serial no. M0022656 Rated for 16 Hp, 78 ft. lb torque, 61 at startup 3800 rpm free speed, 1800 rpm at max power 425 SCFM air consumption Turns freely (1) available
Stock no. G-4078 1 inch flanged Flowserve 316 Stainless Steel Control Valve Logix model 3200MD-14-D6-5-04-40-0G-00 Part no. 255427.999.000, serial no. 1215019 (1)available
Stock no. B-4538 1 Hp Cowles Lab Post Mount Disperser Mixer Model 1-VG-1.5, serial no. LA-709, 2/75 1 Hp, 1750 rpm, 115-208/230 volt, 60 Hz, 1 ph motor (looks newer) Manual Speed Control, manual crank lift raise and lower 1 inch diameter x 10 inch long stainless steel shaft O/a 32 x 17 x 31 […]
Stock no. A-5720 110 gallon Sanitary Stainless Steel Cone Bottom Tank 30.5 inch id x 36 inch with slight cone bottom Has slip on hinged lid with a slot for a mixer Reinforced plate for a clamp mount mixer 1.5 inch bottom center outlet to 1 inch elbow and valve 64 inch to top lip, […]
Stock no. B-4530 5 Hp Chemineer Right Angle Drive Rating is estimated by size. Has approximately 32:1 ratio 14 x 18 x 13 inch tall gearbox, o/a 39 inch long x 18 inch total height Has 6-bolt 7.25 inch od hub, turns freely (1) available
Stock no. P-3561 2.5 inch Waukesha Stainless Steel DISPLACEMENT PUMP Waukesha Model 060 U1 , serial no. 1000002989205, 7/10/2015 2.5 inch I Line tri-clamp fittings 5 Hp, 1740 rpm, 230/460v, 13.4/6.7a, 184TC 4.43-1 ratio gear reducer, 393 rpm output In the process of being refurbished. Just waiting on coupling to complete. (1) available
Stock no. B-4532 (4) Pall Life Sciences Magnetic Mixer System, Pall Corp. Mag Mixer Made in Belgium, 08-2021 MMG403 MMD-G4-326 Digital speed control 100 v – 230 v, 1ph, 50/60hz o/a 44 x 16 x 36 inch with handle, 18 inch to top of 4 inch dia. magnet On wheels (4) available UNUSED in original […]
Stock no. B-4531 Pall Life Sciences Magnetic Mixer System, Pall Corp. Mag Mixer serial no. 05.000578, year 2016 Vexta gear head model GFS5G010 with 4 inch diameter magnet Digital speed control 120v, 1ph, 60hz, 2.0 fla, 2.5 a min circuit, 1.5 a largest load o/a 16 x 46 x 23 inch with handle, 19 inch […]
Stock no. P-3573 1 inch Yamada Aluminum Diaphragm Pump Yamada model NDP-25BAT-PP, s/n A74448, date 10/2019 Diaphragm Material Teflon-PTFE Maximum Flow Rate 46.2 gpm Max Pressure 100 psi, 32 to 158 deg. F Max Solids 3/16 inch Dia. Air powered. Pump has been tested (1) available
Stock no. P-3566 1 inch Versamatic Aluminum Diaphragm Pump Versamatic model E1AP6X669C, s/n 2563475, date 5/22/20 Wetted Materials Aluminum, Center Section Material Polypropylene Ball Material and Check Seat Material Santoprene® Diaphragm Series Thermo-Matic Diaphragm Material Santoprene® Maximum Flow Rate 46 gpm Max Pressure 100 psi Air Inlet 3/8 NPT Air Exhaust 1/2 NPT Max Solids […]
Stock no. P-3569 (3) 3/4 inch Versamatic Aluminum Diaphragm Pump Versamatic model E7AP5T559C Wetted Materials Aluminum, Center Section Material Polypropylene Diaphragm Material Teflon-PTFE Maximum Flow Rate 8.45 gpm/ 32 lpm Max Pressure 100 psi Max Solids 1/16 inch/1.6 mm Dia. Air powered. Pumps have been tested (3) available
Stock no. P-3568 1 inch Versamatic Stainless Steel Diaphragm Pump Versamatic missing id plate Diaphragm Material Buna Maximum Flow Rate to 49 gpm Max Pressure 100 psi Air Inlet 3/8 NPT Air Exhaust 1/2 NPT Max Solids 1/8 in Dia. Air powered. 40 lbs shipping weight. Pump has been tested (1) available
Stock no. P-3564 1 inch Waukesha Stainless Steel Model 030U2 DISPLACEMENT PUMP Waukesha Model 030 U2, serial no. 1000004147744, 3/10/2022 1 inch id flanged fittings. Optional drive setup available (1) available
Stock no. B-4480 45 inch wide Stainless Steel Anchor Type Sweep Agitator Parts 45 inch wide x 30 inch to coupling Not complete, selling as is. (1) available
Stock no. B-4502 53 inch wide Stainless Steel Lee 1 Hp Sweep Agitator 53 inch wide with wipers, 38 inch to top of sweep 1 Hp, 3 ph gear motor to 13:1 ratio gearbox (1) available
Stock no. B-4475 52 inch wide x 39 inch Stainless Steel Double Motion Sweep Agitator Parts 52 inch wide plus brackets for wipers, 59 inch to top of gearbox Not complete, selling as is. (1) available
Stock no. B-4536 44 inch wide x 32 inch Stainless Steel Double Motion Sweep Agitator Parts 44 inch wide plus wipers, 52 inch wide bridge Not complete, selling as is. (1) available
Stock no. B-4511 30 + Hp STAINLESS STEEL HOMOGENIZER MIXER 48 inch shaft No manufacturer plate Approx. 30+ Hp, missing plate. XP plate no. L AB591041 3 ph, XP, possibly 230/460v Stainless steel contacts. Vertical configuration 1.5 inch x 48 inch shaft, 4.5 inch dia. stator,no rotor 4-bolt x 13.5 inch od flange mount. Has […]
Stock no. E-4797 100 liter Portable Jacketed 316L Stainless Steel Tank ATMI Life Sciences p/n RCTA100G, year 2013 Side jacket rated for 90 psig @ 300 deg. F > -20 F 18 inch inside diameter x 30 inch deep with flat bottom, open top 23 inch outside diameter on (4) legs/wheels Bottom side of jacket […]
Stock no. E-4796 60 liter/16 gallon 316L Stainless Steel Pressure Tank Stainless Technology, no. 7740, year 2010, dwg. ST02D056 National Board 896, rated for FV/50 psi @ 300 deg. F > -20 F 17 inch diameter x 17 inch with dished bottom and top Top has (7) 1.5 inch tri-clamp top inlets, one with a […]
Stock no. E-4800 40 gallon STAINLESS STEEL STEAM JACKETED KETTLE Legion, serial no. 21655, year 1962 National Board no. 2742, rated for 40 psi @ 300 deg. F. U stamped 26 inch diameter x 22 inch deep, 30 inch outside diameter. 3 legs Has a 1.5 inch bottom to side outlet with a valve. 1.5 […]
Stock no. E-4799 40 gallon STAINLESS STEEL STEAM JACKETED KETTLE Market Forge by Legion, model MF-40, serial no. 752049, year 1975 National Board no. 7459, rated for 30 psi @ 300 deg. F. U stamped 26 inch id x 22 inch deep with hinged lid and tilt out bowl Has a 1.5 inch bottom to […]
Stock no. A-5719 1000 liter SANITARY STAINLESS STEEL TANK BREWERY WINE TANK No mfg. information. Labeled 1000 on side. 1000L/264 gallons 39 inch inside diameter x 51 inch straight side with dished bottom, open top 1.5 inch side outlet and bottom side outlet from slanted valley in tank Has short stand it sits on. High […]
Stock no. A-5718 1100 liter SANITARY STAINLESS STEEL TANK BREWERY WINE TANK G W Kent Letina Wine Tanks, Type PZP1100S10, Year 2018 1100 liter/290.5 gallon 37.5 inch inside diameter x 60 inch straight side with flat bottom open top with slip on lid 2 inch bottom side outlet Looks great! High polished finish (1) available
Stock no. A-5715 (3) 1500 liter SANITARY STAINLESS STEEL TANK BREWERY WINE TANK G W Kent Letina Wine Tanks, Type PZP1500S11, Year 2019 1500 liter/396 gallon capacity 43 inch inside diameter x 62 inch straight side with flat bottom open top with 2 pc. slip on lid 2 inch bottom side outlet and side sample […]
Stock no. G-4075 Thermo Scientific Accel 500LC LIQUID CHILLER RECIRCULATOR Model Accel 500LC , sn 0141482401150603, bom 223422800 Digital controls, 115 volt, 1 phase, 60 hz, 11.7 amp Internal reservoir. 1/2 inch supply and return connections More details to follow. O/a 9 x 18 x 264 inch tall (1) available
Stock no. G-4074 NESLAB Merlin M75 LIQUID CHILLER RECIRCULATOR Model M75, sn 100336032, bom 624116040000 Digital controls, pressure gauge. 5 to 35 deg C 208/230 volt, 1 phase, 60 hz, 12.6 amp Internal reservoir. 3/4 inch supply and return connections More details to follow. O/a 17 x 26 x 26 inch tall (1) available
Stock no. A-5710 (3) White Mountain Process 500 Liter Mixing Tank Serial no 180391-C (other 2 are -A and -D) Marked 500 liter, total capacity is 140 gallons. Heavy duty poly/plastic portable tanks with a bolted top and cone bottom on wheels. There are some top fittings including a sight glass and a 1.5 inch […]
Stock no. G-4073 2.36 sq. ft. Sanitary Polished Stainless Steel U Tube Heat Exchanger 150 psi 350 F Yula model CV-2AA-3086, serial no. 16080, year 1996 National Board no. 9821. Marked PURE WATER HEATER Shell and tubes rated for 150 psi @ 350 deg. F > 0 deg. F There are (4) 3/4 inch od […]
Stock no. G-4076 30 x 30 inch Fairbanks Stainless Steel Platform Floor Scale for Parts or Repair Fairbanks model IND-HR2300-2, class XXX-XXXL, p/n 22258 Serial no. N052430100083, nMax 10,000, eMin, NTEP CC98-131 CND UL Listed, 115/230v, 1 ph, .05 a, 50/60 hz, 9-15 vdc Platform measures 30 inch x 30 inch and has a fold […]
Stock no. E-4795 4.75 gallon 17 liter 316L SS Jacketed Pressure Tank w/304L ss jacket Precision Stainless serial no. 981400, year 2000 National Board no. 8328. 17 liter/4.75 gallon capacity sh= 50 psi, jkt=100 psi @ 350 deg. F > -20 F, 15 psi vacuum .135 inch shell, 1.00/.375 inch head, 14 gauge jkt shell […]
Stock no. P-1874 1 inch Waukesha Stainless Steel Model 10 DISPLACEMENT PUMP Waukesha Model 10, serial no. GT2013SS ss sanitary with relief valve 1 inch fittings. (1) with tri-clamp, other with threads. We may have an adapter >tri clamp O/a 12 x 30 x 18 inch SS Batwing type rotors. (1) available
Stock no. E-4793 Unused 3 gallon 316L Stainless Steel with 304L Jacket Pressure Tank Alloy Products serial no. C223080-1-001, year 2014 ASME stamped, rated for 50 and 100 psi @284 deg. F > -20 deg. F 12 inch diameter x 6 inch straight side with dished bottom and top On 4 legged stand, 2 handles, […]
Stock no. E-4794 5 gallon 316 Stainless Steel Jacketed Reactor Cherry Burrell serial no. E-342-92, yr. 1992, National Board no. 3930 Shell rated for 40 psi @ 350 deg. F, Jkt. = 100 psi @ 350 F > – 20 F 12 inch inside diameter x 11 inch w/ dished bottom, flat top (clamped) 4 […]
Stock no. A-5714 38 gallon Sanitary 316 Stainless Steel Tank CIP Polished 23 5/8 inch id x 20 inch with cone bottom and domed hinged lid 1 inch bottom center outlet with valve, 1.5 inch side inlet 12 inch and (2) 1.5 inch top inlets, all tri-clamp type 4-legs on a 36 x 36 inch […]
Stock no. P-3533 3/4 inch ARO Aluminum Diaphragm Pump Model PD07R-AAS-PTT, SPL 2171102 Polypropylene seats, PTFE balls, PTFE/Santoprene diaphragms Rated to 13.6 gpm, 100 psi, 3/32 inch solids, 15 ft. max suction lift Air powered (1) available
Stock no. B-4528 1.17 Hp Lightnin Vertical Down Flange Mount Mixer Model XJC-65, no. R9971823700501 1.17 Hp, 1725 rpm, 208-230/460 v, 3ph Flange mount with packing gland 4-bolt shaft mount. Direct high speed (1) available
Stock no. B-4527 .43 Hp Clamp Mount 1 ph XP Mixer Stainless Steel Shaft Greey Mixing Equipment of Toronto 1725 rpm, 115/230 v, 1 ph, XP Direct, high speed with stainless steel shaft and prop (1) available
Stock no. B-4529 25 liter Stainless Steel Jaygo Jacketed Double Blade Sigma Mixer Jaygo model AM-25-SF, serial no. 2648, year 1998 Made by Lleal Process S.A. of Spain, machine AMASADORA Manufacturer no. 14383-1, serial no. 3506 Powered by 5 Kw/6.7 Hp, 480 v, 7.2 a motor Hydraulic tilt for bowl, vacuum rated Controls = Reverse, […]
Stock no. E-4790 150 liter/39.6 gal Stainless Steel Jacketed Tank with Mixer 25.5 inch id x 17.75 inch deep with flat bottom and clamped top with seal Full side jacket. No plate indicating pressure or manufacturer .75 Kw (1 Hp) top center mount mixer with a 12 inch prop Mixer by Changzhon South Motor Co., […]
Stock no. E-4791 150 liter/39.6 gal Stainless Steel Jacketed Tank with Spiral Mixer 25.5 inch id x 17.75 inch deep with flat bottom and clamped top with seal Full side jacket. No plate indicating pressure or manufacturer .75 Kw (1 Hp) top center mount mixer with a spiral ribbon agitator Mixer by Changzhon South Motor […]
Stock No. E-4787 30 gallon 316L SS Jacketed Reactor Vacuum Dimple Jacketed Letsch EMF-2000, serial no. 5003-1, yr. 1982 National Board no. 646 316L Stainless Steel shell re-certified to 44 psi @ 300 deg. F 29.92 inches Hg vacuum. .105 inch shell and hds. 20.25 inch hd radius 16 ga. Inconel 600 dimple jacket rated […]
Stock No. E-4788 60 Liter/15.8 gallon Stainless Steel Lee Jacketed Reactor with Bottom Mixer Lee model no. 60LU, serial no. 95487-1, yr. 2016 National Board no. 13568. Stainless Steel shell rated for vacuum/45 psi @ 300 deg. F > -20 F SS jacket rated for 100 psi @ 338 deg. F > -20 F 21 […]
Stock no. P-3529 3 inch Sandpiper Stainless Steel Diaphragm Pump Warren Rupp Sandpiper, plate is missing 3 inch flanged fittings. Air powered. Looks good. To be tested. (1) available
Stock no. P-3534 3 inch Hilge Hygienic Stainless Steel Pump Type Sanita 3 R 80. Serial no. HF2377 3 inch sanitary threaded fittings Powered by a 15 Kw (20 Hp), 220/380 v, 1500 rpm min 18 Kw (24 Hp), 460 v, 1750 rpm motor (1) available
Stock no. P-3539 3 inch APV DW4 SANITARY STAINLESS STEEL DISPLACEMENT PUMP Type DW4/073/10, no. 10005238, order 23496266, made in Poland 7.5 Hp, 1750 rpm, 230/460 v, 3 ph to gear reducer 3 inch in and out Rated to 19.3 gallons per 100 rpm, to 145 psi Aseptic positive displacement bi-lobe pump (1) available
Stock no. E-4775 10 gallon STAINLESS STEEL DUAL MOTION JACKETED SWEEP TILT KETTLE Mfg. Ace Stainless Steel Tank Corp 16 inch diameter x 14 inch deep. 1 pc. lid, tilt out sweep agitator Has a sweep with wipers and counter rotating blades Sterling 1 Hp vari-drive,95>190 rpm, 115/208-230v, single phase for agitator 1/4 Hp 115/230 […]
Stock no. A-5706 1300 Liter High Polished Stainless Steel Jacketed Tank with Sweep Agitator TSI TaeSung Industrial. Labeled Binder Storage Tank, A1A-BS1. 343 gal With Hico 5 Hp, 1725 rpm, 460 v, XP motor, geared to 50 rpm sweep agitator 48 inch diameter x 43 inch straight side, dished bottom and bolted dished top Top […]
Stock no. E-4784 1300 Liter High Polished SS Non-Jacketed Tank with High Speed Disperser TSI TaeSung Industrial. Labeled Binder Mix Tank A1A-BM1. 343 gallon With HICO 15 Hp disperser, 1760 rpm, 460 v, XP, with saw tooth blade 48 inch diameter x 43 inch straight side, dished bottom and bolted dished top Top has a […]
Stock no. E-4782 (2) 60 gallon STAINLESS STEEL JACKETED KETTLE Legion 1951 Army Standard Steam Jacketed Kettle Contract no. DA-11-009-QM-14328 29.5 inch diameter x 25 inch deep. Has a hinged lid Has a 1.5 inch bottom center to side outlet . No internals for valve Side and bottom jacket fittings. (3) galvanized legs, 43 inch […]
Stock no. G-4061 148 Kw 125 psi P M Lattner Steam Boiler Model 148 BF, serial no. 90644, year 2006 Rated for 125 psi. Maximum design steaming capacity 518 480 v, 3 ph 54 x 42 x 78 inch o/a on pallet, 1048 lbs Recently used with a 300 gallon jacketed kettle (1) available
Stock no. E-4779 150 gallon Lee 316SS Vacuum Jacketed Kettle with Mixer Model 150D, serial no. B8125A, year 1993. National Board no. 5632 316 ss shell rated for 30 psi @ 275 deg. F . Designed for Vacuum Service 304 ss jacket rated for 90 psi @ 332 deg. F > -20 F 42 inch […]
Stock no. C-2812 15 Hp Premier HM5 Supermill Media Mill Serial no. HM5-15-1.5-DV-4-84-0011, date 10/84 15 Hp main motor, 1,5 Hp pump motor, 460 volt, XP o/a 54 x 43 x 60 inch on wheels Slight dent on bottom shroud, but otherwise looks good. (1) available
Stock no. E-4778 80 gallon Sanitary 316 SS Jacketed Kettle Single Motion Sweep Kettle Lee model 80D75, no. C1835A, year 1995, National Board no. 6300. Jacket rated for 90 psi @ 332 deg. F. Has side and bottom jacket fittings 3/4 Hp,1700 rpm, gear reduced to 11 rpm, 380/575v, 3 ph Single motion sweep agitator […]
Stock no. G-4060 Sanitary Stainless Steel Strainer basket from 100 gallon Kettle 33.75 inch outside diameter x 27.5 inch tall Has (4) 3 inch top support tabs and a top center lug for lifting Also has a 12 inch bottom center outlet with a butterfly valve Last used for soups and chowders. Kettle in picture […]
Stock no. E-4776 50 gallon Sanitary SS Jacketed Kettle Single Motion Sweep Kettle Hamilton Kettles,serial no. C-2892-2, style SA National Board no. 4911, year 1981. Full jacket rated for 45 psi @ 274 deg. F. Has side and bottom jacket fittings 3/4 Hp, 900 rpm, gear reduced believed to be 38.44-1 ratio (plate worn), 3 […]
Stock no. P-3536 (3) 3 inch Tri-Clover Stainless Steel Displacement Pump Model PRR60-3M-TCI-4-SL-S, serial no. 7205 3 inch tri-clamp inlet and outlet. Stainless steel rotors. Relief valve. (3) similar available
Stock no. A-5705 750 gallon Sanitary Stainless Steel Cone Bottom Tank Crepaco serial no. A.0150 66 inch id x 50 inch straight side with cone bottom and dome top Top inlets = 3 inch, 2 inch, (2) 1.5 inch, 2 inch vent, 18 inch top manway with hinged lid. Has 3.5 inch bottom center outlet […]
P-3525 (2) 6 x 8-17 Goulds 3196 Centrifugal Pump 2400 gpm 110 ft. hd. DI/316SS Serial no. 768H983 (768H982 for P-3524), year 2022 Ductile Iron body, 316 ss impeller, shaft, mechanical seal. Both rated for 2400 gpm, 110 ft. Hd, 250 psi max at 1195 rpm Both with 16.75 inch diameter impeller 6 inch inlet, […]
Stock no. E-4774 30 gallon Electric Heated Water Jacketed Tank Kettle on wheels Chinese made, possibly by Zheijang no visible plate Controls have English & Chinese markings. 220 volt, single phase heating 21 inch id x 19.75 to 20.5 inch slant bottom, hinged lid Polished internals. Top mount air powered mixer with 3-blade prop Has […]
Stock no. A-5703 6 gallon Sanitary Polished Stainless Steel Portable Tank 11 5/8 inch id x 13.5 inch deep with slight slant bottom Has hinged lid with a seal Has tri-clamp 1 inch side outlet, 1.5 inch side outlet, 3.5 inch top center inlet (3) legs on wheels (1) available
Stock no. A-5702 75 gallon Stainless Steel Tank Dished Bottom with Inside Coating Manufactured by Tolan, serial no. 8502, year 2009 Heavy gauge stainless steel with a white internal coating in great shape 27.75 inch id x 33 inch with a dished bottom, fixed top with hinged lid Has a mixer bracket and slot in […]
Stock No. E-4703 60 Liter/15.8 gallon 316L SS 150 psi Jacketed Reactor Vac 45 psi Pure-Flo Precision, ITT Industries, serial no. 241471-2, yr. 2005 National Board no. 10902 316L Stainless Steel shell rated for 15 psi vacuum/45 psi @ 383 deg. F 16 inch id x 20 inch straight side w/db & hinged clamped dt […]
Stock no. B-4513 1 Hp Shar Gear Reduced Mixer Agitator Drive 88 rpm Shar serial no. 02102195 , 1995. 1745 rpm in, 88 rpm out, 230/460 v SS shaft and blades. Last used on a 500 gallon tank Buy with or without the attached stainless steel lid (1) available
Stock no. E-4770 250 gallon SS Jacketed Kettle Hamilton with High Speed Mixer Style SA, serial no. 11308, year 1978, National Board no. 3091 Jacket rated for 40 psi @ 267 deg. F Has 10 Hp High Speed mixer with a saw tooth blade midway and a prop on bottom 230/460 volt, 23.8/11.9 amp. Includes […]
Stock no. E-4768 150 Liter/39.6 gallons Electric SS Jacketed Kettle Firex Model PFIE150A 2000000, made in Italy. LOOKS UNUSED! Serial no. 065140SD28/2014. 208 volt, 3 ph, 14.7 Kw. 23.5 inch inside diameter x 20 inch deep, o/a 45 x 46 x 45 inch on wheels 2 inch bottom > side outlet with valve. Has hinged […]
Stock no. P-3442 1.5 inch Waukesha Sanitary Stainless Steel Displacement Pump Model 030, serial no. 226887-98 3 Hp, 1750 rpm to a belt drive, 230/460 v, 3 ph 1.5 inch tri-clamp fittings, stainless steel fan belt guard included Just refurbished (1) available with this setup
Stock no. P-3514 (6) 1 inch Stainless Steel Displacement Pump Rotary Lobe Howard Pump Co. model CLV/1H/012/20 Rated for 290 psig, maximum 960 rpm Rated to 15 bar and 110 deg. C 1 inch tri-clamp in and out Looks good and turns freely (6) available
Stock no. E-4762 300 liter/79.2 gallon 316L /2205 SS Jacketed Pressure Tank FV 15 psi Inox industries of Toronto, no. DP-41, P/N N04-246-8, 2/2015 Rated for Full Vacuum/15 psi @ 300 deg. F 30 inch diameter x 22 inch straight side with dished bottom Has 24 inch top lid with clamp and gasket, top center […]
Stock no. P-3503 2 inch DEPA SANITARY STAINLESS STEEL DIAPHRAGM PUMP Depa Pumpen model DL 50 SL GEP, serial no. 57991, made in Germany Air powered with 2 inch tri-clamp fittings Mounted on 4 wheeled cart with basket. O/a 25 x 26 x 55 inch Includes air regulator and valve (1) available
Stock no. P-3512 (2) 2.5 inch MasoSine Sanitary Stainless Steel Low Shear Pump Masosine by Watson Marlow, Model MR125, serial no. 16151 1211 1 Hp, 1700 rpm, 230/460 v, 3 ph Eurodrive with manual speed control Has 5.67-1 ratio gear reducer Pump max operating speed is rated for 800 rpm, 145 psi O/a 16 x […]
Stock no. E-4759 20 gallon Stainless Steel Pressure Tank Letsch serial no. 3462-2, year 1980. National Board no. 441 Rated for 35 psi @ 300 deg. F . .135 inch thick shell 18 inch diameter x 17 inch with dished bottom and hinged clamped lid Has (3)1.5 inch top inlets, 1.5 inch bottom center outlet […]
Stock no. E-4760 130 liter/34.3 gallon Stainless Steel Pressure Tank Gilbert Industries Inc. serial no. JS62174, year 2013, National Board no. 218 Rated for 15 psi vacuum/60 psi @ 250 deg. F > -20 deg. F 24 inch diameter x 15 inch with dished bottom and top Has 6 inch top center inlet, 4 inch, […]
Stock No. E-4758 50 liter/13 gallon 316L SS Precision Stainless Jacketed Reactor Serial no. 3008-2), Dwg 50088D, year 1996 National Board no. 6615 316L Stainless Steel shell rated for 100 psi @ 300 deg. F .187 inch thick body, .250/.187 inch heads 4 inch top center inlet, 3 inch, (2)2 inch, and (3) 1 inch […]
Stock no. E-4756 400 gallon STAINLESS STEEL JACKETED KETTLE Hamilton serial no. B-7933, year 1977, Style SA Jacket rated for 150 psi @ 389 deg. F. 62 inch inside diameter x 44 inch deep. 81 inch to top rim, 65 inch outside diameter Has a 10 inch bottom center outlet with a gate valve and […]
Stock no P-3510 1.5 inch Kinney LIQUID RING VACUUM PUMP Model KLRC-75KFA2, serial no. 727730501, rated to 75 acfm 1.5 inch flanged to thread inlet and outlet 5 Hp, 1735 rpm, 460 v, 3 ph, 60 hz O/a 32 x 54 x 47 inch including ss cart and expansion tank NOTE expansion tank has a […]
Stock no. G-4057 NESLAB CFT 33 LIQUID CHILLER REFRIGERATED RECIRCULATOR Model CFT-33, sn 84D14553-32, pn 332190 Analog controls. Rated for 950 watts cooling at 60 hz 115 volt, 1 phase, 60 hz, 12.0 amp Circulating pump tested, internal reservoir. 3/4 inch supply and return connections (1) available SALE PENDING
Stock no. P-3406 (2) 1.5 inch Waukesha SS Displacement Pump 030 with Jacketed Head Model 030 with jacketed heads 3 Hp, 1750 rpm to a belt drive, 230/460 v, 3 ph 1.5 inch tri-clamp fittings Just in, update to follow (2) available, one with this motor setup
Stock no. E-4749 (2) 120 Liter 316L Stainless Steel Pressure Tank FV/14.5 psi @ 300 deg. F/150 C Inox industries of Toronto, no. 990517-1, 8/1999 22 inch diameter x 22 inch + 4 inch>18 inch top lid, clamped w/seal Lid has (3) 1 inch tri-clamp top inlets, 1 inch bottom center outlet w/valve. Has (2) […]
Stock no. E-4681 120 Liter 316L Stainless Steel Pressure Tank FV/15 psi @ 300 deg. F/150 C Inox industries of Toronto, no. N16-432, 11/2016 22 inch diameter x 22 inch + 4 inch>18 inch top lid, clamped w/seal Lid has (2) 4 inch sight glass, (5) 1 inch tri-clamp fittings Side trunnions mounted on a […]
Stock no. E-4753 120 Liter 316L Stainless Steel Pressure Tank FV/15 psi @ 300 deg. F/150 C Inox industries of Toronto, no. NL16-431, 11/2016 20 inch diameter x 20 inch + 3 inch>18 inch top lid, clamped w/seal Lid has (2) 4 inch sight glass, (4) 1 inch tri-clamp fittings, (1) fixed tube fitting Side […]
Stock no. E-4752 100 liter 316L Sanitary Stainless Steel Pressure Tank 15 psi Inox no. 0309-169-3, date 12/2003 Rated for 15 psi @ 300 deg. F/150 deg. C Has a drum type lid on top and internal lid inside listed below 10 inch top center lid with (2) 1 inch tri-clamp & (2) tube connections […]
Stock no. G-4052 Santasalo-Sohlberg Corp Stainless Steel Shell and Tube Heat Exchanger Serial no. 51311DB/1, year 1991, National Board no. 2604 Shell and tubes rated for 116 psi @ 347 deg. F > 34 deg. F There are (30) 5/8 inch od tubes x approx. 48 inch long There is a 1/2 inch pipe running […]
Stock no. P-3509 3 inch MasoSine Sanitary Stainless Steel Low Shear Pump Model MR135, serial no. 16891 0413 Rated for .23 gallons per revolution up to 138 gpm. Max 600 rpm Does have some missing internal parts. Currently selling for parts or repair. (1) available
Stock no. C-2811 630 mm FILTER PRESS with CENTER FEED GASKETED POLY PLATES Filtratec model 1501630 Has (14) 630 mm gasketed recessed poly plates with 2 inch center feed, (4) 1.5 inch corner outlets, approximately 4.2 cu. ft. cake capacity 29 inch wide x 71 inch foot print 42 inch wide with handles x 83 […]
Stock no. B-4508 (2) 40 Hp Admix Rotosolver 250RS175SS Rebuilt Drive Serial no. 51979-1, mfg. date 7/27/18, rebuild date 03/06/24 40 Hp, 1750 rpm, 230/460 v, 3 ph Has 20 inch od 8 bolt mounting flange and 8 inch od 6 bolt for shaft It is 63 inch overall length/height 1300 lbs with the crate […]
Stock no. P-3506 Dekker HV140A, 130 ACFM, 5 HP Single-Stage Rotary Piston Vacuum Pump Dekker Vacuum Technologies model HV140A, serial no. 2023032913 System model HV140A-460V, serial no. 47580, date 5/2024 5 Hp, 1750 rpm, 230/460 v, 3 ph motor 2.5 inch suction, 2 inch discharge Measures 24 x 22 x 40 inch tall and weighs […]
Stock no. E-4751 14 gallon 316L Stainless Steel Pressure Tank Alloy Products serial no. 104343-001, 190133, year 2000 Rated for 90 psi @ 300 deg. F > 20 deg. F 17 inch diameter x 14 inch with slant dished bottom, domed top Has a 2 inch tri-clamp side outlet and (4) 1.5 inch top inlets […]
Stock no. E-4696 250 liter/66 gallon Stainless Steel Pressure Tank FV 15 psi All Weld wo. 8057, tag# 214 Rated for Full vacuum and 15 psi @ 250 deg. F 26.5 inch diameter x 29 inch straight side Has a dished bottom. On dolly w/wheels Has 18 inch clamped lid, (5) 1 inch tri-clamp top […]
Stock no. E-4736 250 Liter Stainless Steel Pressure Tank FV 15 psi @ 300 deg. F Inox industries of Toronto, R120, 1-97 24 inch diameter x 28 inch with dished bottom, clamped top w/seal 18 inch top lid with a 1.5 inch top center and (4) 1 inch tri-clamp fittings and (2) 4 inch sight […]
Stock no. C-2809 1 SH Mikro Pulverizer 7.5 Hp with Swinging Hammers & Screw Feeder Serial no. 13438. Missing top, base measures 5 inch wide x 11 inch > bolt hole 7.5 Hp, 3495 rpm, 230 v, 3 ph, 60 hz Approximate 3.5 inch x 8 inch throat with a screen Feeds into a stainless […]
Stock no. G-4056 Perl Lab Size Stainless Steel Filling Machine Serial no. 99134 by Perl Packaging Equipment, Middlebury, CT Driven by a DC motor, approx. 1/4 to 1/2 Hp, 115 v input to speed control Has a foot pedal start and stop switch All polished stainless steel hopper, 14 inch id x 13 inch to […]
Stock no. E-4747 1000 liter/264 gallon Mueller SS Jacketed Reactor Serial no. 191482-28, yr. 1997, National Board no. 27272 316L SS (need to confirm) Shell rated for FV/45 psi @ 392 deg. F > 14 deg. F 304L SS Full dimple jacket rated for FV/150 psi @ 392 deg F > 14 deg. F 42 […]
Stock no. B-4505 3 Hp Sanitary Stainless steel Horizontal Blender Horizontal open bar style paddles, approximately 100 gallon working capacity 30 inch top id>33 inch at paddle height, 42 inch deep Has slip on half lid with several openings 3 Hp gear motor, 1775 rpm>350 rpm out to gear>belt or chain(under guard) 230/460v, 3ph, 60hz […]
Stock no. AK 6133 Manton Gaulin Homogenizer, Lab Size Model 15M-8TA, S/S Rated 15 GPH @ 8000 PSI Continuous, 10,000 PSI Intermittent 316 Stainless Steel Construction, Single Stage, With Hopper, Driven By 2 HP, 3/ 60/ 208-220- 440 volt motor, mounted on base with casters. (1)available
Stock no. P-Drive Stainless Steel 1 Hp, 1750 rpm, 208-230/460 v, 3 ph motor With a 25-1 ratio gear reducer and a digital speed control All mounted on a stainless steel cart, o/a 55 x 36 x 41 inches Originally with a 1 inch displacement pump in picture, not included Selling drive alone or can […]
Stock no. G-4054 (2) 12 inch Stainless Steel Rotary Valve 1.5 Hp Automated Ingredient Systems LLC part no. ARLK-255, so. no. 200935, 4/20/2010 12 inch x 11 inch top opening with a 17 inch square 12-bolt flange Bottom flange connected to a pan with (2) 4 inch side outlets powered by a 1.5 Hp, 230/460 […]
Stock no. E-4743 200 gallon Hamilton SS Sweep Agitated Jacketed Kettle 15 psi Style SH, serial no. B-7475, 1977, National Board no. 4089 Jacket rated for 15 psi @ 250 deg. F Has a sweep agitator with wipers 48 inch inside diameter x 36 inch deep. 58 inch to top lip Bridge mounted hydraulic drive […]
Stock no. E-4744 200 gallon Groen SS Sweep Agitated Jacketed Kettle 100 psi Model RA 200 SP, serial no. 61363, 4/17/60 Jacket rated for 100 psi working pressure Has a sweep agitator with wipers and center blades all moving in one direction 48 inch inside diameter x 36 inch deep. 59.25 inch to top lip […]
Stock no. E-4742 20 liter 316 Sanitary Stainless Steel Pressure Tank 15 psi Inox no. 0112-066-3, date 2/2002 rated for 15 psi @ 300 deg. F/150 deg. C 8.5 inch top center lid with 1 inch tri-clamp center inlet, 1/2 inch tri-clamp with dip tube attachment, and (2) tube fittings Measures 16 inch diameter x […]
Stock no. B-4426 40 gallon J H Day Pony Mixer for Parts or Repair 5 Hp, 1725 rpm, 230/460 v, XP with variable speed XP controls Includes (2) 40 gallon ss tanks with portable carts Currently partially dis-assembled. Looks like most parts are there Not sure what the problem is. Motor runs. Selling AS IS.
Stock no. B-4499 10 Hp Jaygo Post Mount Disperser Mixer XP Manual Speed Control, air over oil lift 10 Hp, 1740 rpm, 230/460 volt, 60 Hz, XP motor 1 7/8 inch diameter x 41 inch long stainless steel shaft Currently with 6.5 inch diameter 6-blade, paddle type O/a 52 x 24 x 72 inch tall. […]
Stock no. B-4500 7.5 Hp Myers Post Mount Disperser Mixer model 775A-7.5-1446 Date 5/85. Manual Speed Control, air over oil lift 7.5 Hp, 1170 rpm, 230/460 volt, 60 Hz, XP motor, 254T TE frame 1.75 inch diameter x 40 inch long stainless steel shaft Currently with 6.5 inch diameter 6-blade, paddle type O/a 65 x […]
Stock no. C-2807 30 inch x 3 Multi-Cartridge Filter Sanitary Stainless Steel No mfg. plate visible. 2 inch tri-clamp bottom in and out, 1.5 inch top outlet with 1/4 inch vent/draw 6 inch diameter x 32 inch straight side and dished top O/a 18 inch x 18 inch x 54 inch tall on wheeled base […]
Stock no. E-4740 22 gallon Sanitary SS Cone Bottom Insulated Pressure Tank 16 inch id x 24 inch + 5 inch cone bottom with clamped dished top with seal Has outside insulated shell, 20 inch outside diameter. Labeled Fill Tank There is no mfg. plate or one indicating a pressure rating. Has a 3 inch […]
Stock no. G-4048 24 x 31 inch 12 v dc Stainless Steel Platform Scale Mettler Toledo model 8525, no. 6121813-6WX, RAM 1102 Measures 24 inch x 31 inch x 6 inch tall (1) available
Stock no. B-4497 1 Hp Stainless Steel Tri-clamp Mount Mixer Vari-Speed MXD Process serial no. A11880 1 Hp, 1740 rpm, 208-230/460v, 3 ph stainless steel motor Lenze AC Tech speed control type ESV751ND1SXC 120/240v, 1 ph input and 0-230 v, 3 ph output 9/16 inch x 22 inch ss shaft with fixed A310 style prop […]
Stock no. A-5684 150 liter Servolift Polished Stainless Steel Conical Tank IBC No. 11745-150L-01. 105 liter working capacity 24 inch x 24 inch x 9 inch straight side with 16 inch cone bottom 1 inch, 4.5 inch, and 11 inch tri-clamp top inlets, 8 inch bottom center with valve Sits on a portable stainless steel […]
Stock no. A-5682 50 liter Servolift Polished Stainless Steel Conical Tank IBC No. 11745-50L-01. 35 liter working capacity 16 inch x 16 inch x 7 inch straight side with 9 inch cone bottom 1 inch, 4.5 inch, and 8 inch tri-clamp top inlets, 6 inch bottom center with valve Sits on a portable stainless steel […]
Stock no. A-5683 20 liter Servolift Polished Stainless Steel Conical Tank IBC No. 11745-20L-01. 14 liter working capacity 12 inch x 12 inch x 5 inch straight side with 8 inch cone bottom 1 inch and 6 inch tri-clamp top inlets, 4 inch bottom center with valve Sits on a portable stainless steel stand O/a […]
Stock no. A-5687 950 liter SANITARY STAINLESS STEEL CONE BOTTOM Tote Tank Bohle 950 Liter IBC Bin with Cart, approximate 300 gallon total capacity 48 inch diameter x 26 inch straight side with 24 inch cone Has a 22.5 inch top manway with (2) internal baffles, with a 12 inch top center port, and 2 […]
Stock no. A-5685 30 cu. ft. 224 gallon Stainless Steel Conical Tote Systems Tank Tank measures 33 x 39 x 33 inch straight side with 17 inch cone 9 inch bottom center outlet and 22.5 inch top center manway O/a 42 x 48 x 70 inch tall sitting on a 44 x 50.5 x 5 […]
Stock no. E-4733 33 gallon/124 liter Stainless Steel Portable Pressure Tank FV 15 psi MFG All-Weld of Ontario, Canada, serial no. W 40 2421, Tag no. 394, 3/2001 Rated for Full Vacuum and 15 psi 20 inch diameter x 24 inch with dished bottom and clamped top with seal 13 inch center lid with (5) […]
Stock no. E-4731 (2) 65 liter 316L Stainless Steel Insulated Pressure Tank 45 psi and vacuum Zetterstroms Rostina AB of Sweden serial no. 06 2570 (2569 on 2nd), year 2006 National Board no. 258. Rated for -14.5 psi vacuum and 45 psi @ 302 deg. F 316L stainless steel contacts, 304 stainless steel outer insulation […]
Stock no. B-4320 1/4 Hp Lightnin 4 inch Tri-clamp Mount Mixer Serial no. RO337697801, model EV1L25 4 inch tri-clamp mount 1/4 Hp, 1750 rpm, 230/460v, 3ph, 1.5/.55 amps, 2700 rpm max. (1) available
Stock no. E-4729 (2) 50 liter/13 gallon Stainless Steel Pressure Tank FV 15 psi Inox industries of Toronto, no. M50-11-95, material 2205 Rated for Full vacuum and 15 psi @ 300 deg. F 16 inch diameter x 17.75 inch straight side with dished bottom Has top lid with clamp has (2) 1 inch top inlets […]
Stock no. E-4730 100 liter/26.4 gallon Stainless Steel Pressure Tank FV 15 psi with bottom impeller Inox industries of Toronto, no. N09-229-1, 11/2009, material Avesta 2205 Rated for 15 psi jacket and -14.7 psi vacuum @ 200 deg. F/93 C 17.5 inch diameter x 26.5 inch straight side with dished bottom Has 18 inch top […]
Stock no. E-4725 3 gallon Polished Stainless Steel Jacketed Reactor Allegheny Bradford Serial no. 228-3-1-1, year 1999. Print no. F818400 Shell rated 50 psi @ 266 deg. F > -20 F Jacket rated for 120 psi @ 266 deg. F > -20 F 10 inch inside diameter x 13 inch with dished bottom and dished […]
Stock no. E-4724 8 gallon Polished Stainless Steel Jacketed Reactor Allegheny Bradford Serial no. 2228-5-1-2, year 1999. Print no. F818600 Shell rated 50 psi @ 266 deg. F > -20 F Jacket rated for 120 psi @ 266 deg. F > -20 F 12 inch inside diameter x 17.5 inch with dished bottom and dished […]
Stock no. E-4717 150 gallon Stainless Steel Angled Sweep Jacketed Kettle INA Groen Groen model INA/2-150, serial no. 02226-1, yr. 1995-05 National Board no. 139252. Jacket rated for 100 psi @ 338 deg. F to -20 deg. F Agitation is fix mounted on an angle and has a hanging baffle Sweep has (5) wipers with […]
Stock no. E-4695 (2) 250 liter/66 gallon Material 2205 Stainless Steel Pressure Tank FV 15 psi Inox industries of Toronto, no. R118, 1/97 Rated for Full vacuum and 15 psi @ 300 deg. F 26 inch diameter x 27 inch straight side Has a dished bottom. On dolly w/wheels Has 18 inch clamped lid, (4) […]
Stock no. E-4715 30 gallon STAINLESS STEEL JACKETED TILT KETTLE Sanitary stainless steel from food service Legion model D30, serial no. 25489, yr. 1950 Rated for 45 psi @ 650 deg. F Tilt for dumping, no outlet Mounted on pedestal. More info to follow (1) available
Stock no. C-2805 30 inch x 6 Multi-Cartridge Filter Sanitary Stainless Steel 150 psi Made by Allegheny Bradford for Millipore, catalog no. CES30508 Serial no. 1953-3-1, year 1998, CRN L4166.5 Rated for 150 psi @ 300 deg. F > -20 deg F 2 inch tri-clamp bottom in and out, 1.5 inch top outlet with 1/4 […]
Stock no. E-4714 150 liter/40 gallon Material 2205 Stainless Steel Pressure Tank FV 15 psi Inox industries of Toronto, no. R134, 1/97 Rated for Full vacuum and 15 psi @ 300 deg. F 22 inch diameter x 25 inch straight side + 3.5 inch>18 inch top diameter Has a dished bottom. (4) legs on cart […]
Stock no. E-4713 100 liter/26.4 gallon 316L Stainless Steel Pressure Tank FV 15 psi Inox industries of Toronto, no. S2-100-1, 3/96, Tank 1323 Rated for Full vacuum and 15 psi @ 300 deg. F 18 inch diameter x 25 inch straight side with dished bottom Has 18 inch top lid with clamp, 21 inch outside […]
Stock no. E-4712 23 gallon/87 liter Stainless Steel Portable Pressure Tank MFG All-Weld of Ontario, Canada, stamped Tank #1520 Rated for 14.5 psi @ 200 deg. F. Date Jan. 1997 15 inch diameter x 30 inch with dished bottom and clamped dished top 1/2 inch top center inlet, 1.5 inch side inlet, 1/2 inch bottom […]
Stock no. E-4710 98 gallon/370 liter Stainless Steel Portable Pressure Tank MFG All-Weld of Ontario, Canada, stamped Tank #1721 No pressure rating listed, but similar to others rated for 15 psi 31 inch diameter x 30 inch with dished bottom and clamped top with seal 18 inch center lid with (4) 1 inch tri clamp […]
Stock no. E-4682 100 liter/26.4 gallon 316L Stainless Steel Pressure Tank FV 15 psi Inox industries of Toronto, no. N16-090, March 2016 Rated for Full vacuum and 15 psi @ 300 deg. F 22 inch diameter x 16 inch straight side with dished bottom and top Has 10 inch top center opening with clamped lid […]
Stock no. E-4705 20 gallon Steam Jacketed Stainless Steel Tilt Kettle Scrape Agitator Coulter Copper & Brass Ltd, Toronto, Canada serial no. 5443 (?or5), 6/80 Jacket rated for 45 psi (310.2 kpa) @ 292 deg. F (144.4 C) 20 inch inside diameter x 18 inch deep Sweep agitator with wipers. 1 Hp, 90 vdc with […]
Stock no. B-4468 Admix Stainless Steel Boston Turbo Shearpump Inline Mixer Model Turbo 80-2, Serial no. 8115, made by Copek Industrial (acquired by Admix) Unused surplus that had been purchased for a project that never started Has a 200 Hp, 3570 rpm motor, 220/460 volt, 3 ph, 60 hz 3 inch and 4 inch tri-clamp […]
Stock no. P-3483 3 inch WAUKESHA SANITARY SS DISPLACEMENT PUMP Model 130, no. 8048 SS, 3 inch tri-clamp in and out, relief valve Approximately 5 to 7.5 Hp varidrive setup 1790 rpm input, 208-220/440v, 3ph, 60hz Handle for speed control is missing. Platform mounted (1) available
Stock no. A-5680 500 liter 132 gallon Polished 316 Stainless Steel Tank with Sweep Agitator Chinese made by Bejing Xinhangcheng Technology Development Co. Ltd Type PLG-1-500, Product no. 2017071157, date 7-2017. 500 liter capacity, high polished sanitary finish Has bottom sweep agitator with a straight blade half way up the shaft 4 Kw (5.3 Hp) […]
Stock no. E-4699 (2) 400 gallon Chester Jensen Cooker Cooler Kettle body Model 70N40, serial no. 1301-P, date 6-2013. Second one has a worn plate National Board no. 29151, jacket serial no. 77025 Jacket rated for 100 psi @ 340 to -20 deg. F 84 inch id x 16 inch straight side, 34 inch deep […]
Stock no. C-2803 Keith Machinery Floor Model Two 2 Roll Mill Lab Mill 3 x 8 rolls 2 Roll Mill with 3 inch x 8 inch jacketed rolls Made by Anthony Mfg. Inc. for Keith Machinery Serial no. 18377 Approximate 1 Hp motor, 3 ph (plate behind motor) with Eurodrive gear reducer, 1700 rpm input, […]
Stock no. E-4704 300 gallon STAINLESS STEEL STEAM JACKETED KETTLE Lee Metal serial no. 811-R, year 1966 Jacket rated for 90 psi @ 350 deg. F 53.5 inch inside diameter x 42 inch deep. 59 inch > top lip Has a 2.5 inch bottom center outlet Also side and bottom jacket fittings. Jacket needs repair […]
Stock no. P-3378 EDWARDS RV 3 DUAL STAGE ROTARY VANE VACUUM PUMP Model RV 3, code A652-01-903. Rated for 2.6 cfm 115/220 V, 1 PH, 6.9/3.4 amp at 60 hz, 1730 rpm. 1450 rpm at 50 hz Priced with Mist Filter. Has been tested (1) available
Stock no. B-4476 35 cu. ft. Day Stainless Steel Nauta mixer J.H. DAY NAUTA STYLE NIXER. UNIT IS SIMILAR TO MODEL MBX-010 Approximately 35 cu. ft. capacity, 62 inch id x 92 inch cone Designed for ambient service. Stainless steel contact parts 10 HP, 1160 rpm, 230/460 v, 3 ph screw drive, approximately 1 HP […]
Stock no. P-3476 1/2 inch POLY DIAPHRAGM PUMP Manufacturer unknown. Possibly a Wilden 1/2 inch inlet and outlet Air powered. Looks good, will test (1) available
Stock no. P-3475 1.5 inch Stainless Steel Diaphragm Pump Looks like an ARO, but no markings 1.5 inch threaded in and out Air powered Look good, will test. (1) available
Stock no. P-3474 1 inch Wilden Sanitary Stainless Steel Diaphragm Pump Size 2, 1 inch threaded in and out Air powered Pump has been tested. (1) available
Stock no. P-3463 (5) 2 inch Aluminum Diaphragm Pump Versamatic E2 Model E2AA2R229C-ATEX with BUNA N balls and seats Max 160 gpm, 142.7 gpm @ 100 psi. To 320 ft. hd., 180 deg. F Can take up to 0.44 inch diameter solids List price new is $2983. Low price for quick sale! (5) available
Stock no. E-4700 40 gallon STAINLESS STEEL STEAM JACKETED KETTLE SteamMaster by Southbend Certified by Crown Food Service Serial no. 63057-9X-4768, model KSDP-40, yr. 2002 NB no. 41339, CRN OH 2431.5R1, rated for 35 psi @ 284 deg. F Made in Canada. Pedestal Base 26 inch id x 22 inch deep. O/a 42 x 37 […]
Stock no. E-4684 100 Liter/26 gal Polished Stainless Steel Portable Pressure Tank Inox’Ouest of France s/n 80056-300, yr. 2008, CE #0060 National Board no. 116. Rated for 59.46 psi @ 210 deg. F > 68 deg. F 28 inch diameter x 5 inch straight side w/dished top & bottom 1 inch bottom center outlet with […]
Stock no. E-4686 100 gallon Stainless Steel Jacketed Kettle 90 psi Lee Metal s/n 735, 10/54 Jacket rated for 90 psi @ 650 deg. F 36 inch id x 30 inch deep with 2 inch bottom center outlet (2) half lids. Has steady bearing on bottom to support a shaft 1 Hp Grove Gear mixer, […]
Stock no. E-4685 100 gallon Stainless Steel Jacketed Kettle 90 psi Lee Metal s/n 102-S, 7/66 Jacket rated for 90 psi @ 330 deg. F 36 inch id x 30 inch deep with 2 inch bottom center outlet (2) half lids. Has steady bearing on bottom to support a shaft (1) available
Stock no. C-2798 (2) Stainless Steel Sanitary Strainer Filter 4.5 x 32 inch 1.5 inch tri-clamp inlet and outlet with diaphragm valves Has inner screen (2) available
Stock no. B-4471 1 CU. FT. STAINLESS STEEL TWIN SHELL V BLENDER No noticeable mfg. plate Has approximately 1/2 to 1 Hp gear motor, 3 phase connected to a chain drive Stainless Steel V shell is 11.25 inch inside diameter x 20 inch O/a it measures 50 x 54 x 55 inch tall with cage […]
Stock no. B-4467 (2) 5 Hp Lightnin Flange Mount Right Angle Drive 21.2:1 ratio, 83/28 rpm Model 72C5VM, serial no. 7710624 (2nd is 7710623) 5 Hp, 1730 rpm, 208-230/460v, 13.2/6.8a, 3ph, 60hz (2nd is 230/460v) Has 13 inch od 8-bolt flange with packed seal Takes a 2.5 inch diameter shaft, not included. Measures 17 x […]
Stock no. E-4674 (4) 94 gallon/350 liter Stainless Steel Portable Jacketed Pressure Tank with agitator MFG All-Weld of Ontario, Canada, no. SDR-1030 No pressure rating listed, but similar to others rated for 15 psi 32 inch diameter x 27 inch with dished bottom and clamped top with seal Has side jacket with (4) side inlet […]
Stock no. E-4672 500 gallon STAINLESS STEEL JACKETED KETTLE Alfa Laval Vicarb serial no. 14072.13, year 1955, made in Canada CRN 93884.5. Jacket rated for 100 psi @ 300 deg. F > 20 deg. F Second plate indicates 80 psi steam max. Has 3/4 side and bottom jackets, 2 zone 59 inch inside diameter x […]
Stock no. P-3425 6 inch Waukesha model 320 U2 SS Displacement Pump Serial no. 2515447 6 inch flanged in and out, 11 inch od, 8-bolt Motor is approximately 25 Hp, (plate is missing) Gear reduced Mounted on a stainless steel platform, o/a 42 x 68 x 56 inch tall (1) available
Stock no. P-3424 3 inch WAUKESHA MODEL 130 U1 SANITARY SS DISPLACEMENT PUMP Model 130 U1, no. 1000003046101, date 10/20/15 Has integral gear reducer, 7.47-1 ratio that should take a 3 to 5 Hp motor Has 3 inch tri-clamp fittings (1) available
Stock no. P-3422 (4) 2 x 3-10 Goulds 316 SS Centrifugal Pump Model 3196 Serial no. 713G554-4 with a 10 inch impeller 3 inch inlet x 2 inch outlet 10 Hp, 1725 rpm, 230/460 volt, 26.8/13.4 amp, XP motor Rated for 100 gpm and 107 ft. hd. This one is 599 lbs and measures 48 […]
Stock no. E-4655 100 gallon Jacketed Kettle Sweep Agitator Hamilton Kettles serial no. B-3637-1, year 1975. Stainless Steel National Board no. 3516, jacket rated for 80 psi, internal 15 psi @ 312 deg. F 36 inch id x 30 inch deep. 2 inch threaded bottom center outlet>tri-clamp valve Top threaded inlets = 1/2, 3/4, and […]
Stock no. P-3409 (2) 4 inch Waukesha Sanitary Displacement Pump Model 220 Stainless steel Model 220, serial no. 282623-01 (second is 422173-06 ) Both with 10 Hp, 1760 rpm, 230/460 volt motors and belt drives 4 inch threaded fittings. Mounted on stainless steel platform All just in from a food plant (2) available
Stock no. E-4652 200 liter/53 gal STAINLESS STEEL DIMPLE JACKETED TANK Stainless Fabrication Inc. serial no. 18107-1-1, model VE069300 Could not see a mfg’s plate, info provided by previous owner 29.5 inch inside x 19.5 inch deep with flat bottom and open top (57 gal total) On 4 legs with wheels, external handles, o/a 40 […]
Stock no. E-4650 100 gallon STAINLESS STEEL DIMPLE JACKETED TANK 50 PSI Perma San model 100 gallon JOVS, serial no. 33812-2 Single zone side and bottom dimple jacket rated for 50 psi @ 300 deg. F 30 inch id x 33 > 34.5 inch slant bottom and open top (4) legs, 62.5 inch to top […]
Stock no. G-4046 6.329 sq. ft. Plate Heat Exchanger 2 inch tri-clamp fittings WCR Inc. model WCR-A216M, serial no. 2990, year 2015 Rated for 150 psi @ 266 deg. F. 6.329 sq. ft. Has (4) 2 inch tri-clamp fittings Plate pak is 0.69 inch thick. O/a 13 inch x 9.5 inch with fittings x 37.5 […]
Stock no. B-4463 1/4 Hp Right Angle Mixer 10:1 ratio Variable Speed Mfg. by Brother of Japan for Hyclone. Originally with 50 liter single use reactor, no. CC0605-3, p/n SV50171-01, 9/06 Only parts of the reactor are still with it. Mounted on Stainless steel Cart O/a 24 x 36 x 51 inch to top of […]
Stock no. G-4042 Blue M model OV-472A-3 CONVECTION OVEN Serial no. OV3-30104 Rated for 38 to 260 deg C 12.75 x 12 x 12 inch inside, 20 x 21.5 x 28.75 inch o/a dimensions 120v, 1 ph, 60 hz, 11 amp, 3 amp for motor only Has 2 side vents and a rear probe Just […]
Stock no. E-4649 25 gallon STAINLESS STEEL STEAM JACKETED KETTLE GROEN model G25, serial no. and NB no. 11135 1959GM-717, 58109 U and W stamped Jacket rated for 25 psi @ 300 deg. F 28 inch inside diameter x 16 inch deep. (3) legs, 28 inch > top lip Has a 1 inch bottom center […]
Stock no. E-4647 150 gallon Stainless Steel Steam Jacketed Kettle Hamilton Brighton Style SA, Hamilton serial no C3313-2, year 1981. National Board no. 4862 . Jacket rated for 100 psi @ 328 deg. F Brighton plate dated 8/20/84, no. 144 C-6612. U and W stamped 44 inch inside diameter x 34 inch deep on 3 […]
Stock no. E-4644 50 gallon SS Jacketed Kettle Single Motion Sweep Kettle Hamilton Kettles Brighton Division serial no. C-9248-2, style SA National Board no. 5855, year 1987. Jacket rated for 90 psi @ 200 deg. F. Has side and bottom fittings & relief valve 1.5 Hp, 1740 rpm (gear reduced), 230/460 v, 5.2/2.6 amp drive, […]
Stock no. B-4462 3/4 Hp Angled Mount Gear Reduced Mixer with SS Shaft and Blade Nettco 3/4 Hp gear reduced mixer 208-230/460v, 3ph, 60hz Includes 4 ft. stainless steel shaft and a blade (1) available with 4-bolt swivel type mount
Stock no. A-5632 150 gallon SANITARY STAINLESS STEEL BREWERY TANK 32 inch diameter x 36 inch straight side, approximately 150 gallon total Has 6 inch coned top with 24 inch top center opening, no lid 7 inch coned bottom with 1.5 inch tri-clamp center outlet 1 inch side inlet, (2) side outlets, and a 1/2 […]
Stock no. A-5628 (2) 100 liter/26 gal SANITARY STAINLESS STEEL TANK Manufactured in 2014 by Blue Current Brewery of China Type SM100, 100 liter capacity. 20 inch inside diameter x 23.75 inch straight side with slant bottom, open top 2 inch bottom elbowed to side outlet with female threaded coupling connection On 3 wheels. Side […]
Stock no. E-4631 2080 liter/549 gal SANITARY STAINLESS STEEL JACKETED TANK Manufactured in 2014 by Blue Current Brewery of China Type SF2000, 2080 liter capacity. No pressure plate, assume low pressure jacket. Half-side dimple jacket with 3/4 inch fittings 43 inch inside diameter x 74 inch straight side with concave bottom, open top On 4 […]
Stock no. C-2790 4 Kw 5 Hp CUMBERLAND GRINDER MODEL 2030 Serial no. 2030.96027, year 1996 4 Kw/5 Hp , 415/440 volts, 50/60 Hz, 3 phase 330 rpm max rotor speed. 9 x 12 inch opening It has been tested. Additional information to follow
Stock no. P-3399 3 inch WAUKESHA SANITARY STAINLESS STEEL DISPLACEMENT PUMP Model 125, serial no. D041308 SS 3 inch threaded fittings (1) available
Stock no. E-4628 (3) 55 gallon STAINLESS STEEL JACKETED REACTOR FV 30 PSI Inox of Canada serial no. 99033-1, O.I.N. 5.1088798, C R N L2188-5, year 2000 (one is 1997 and rated down to 32 F) Shell and side jacket rated for FV/30 psi @ 300 deg. F to -20 deg. F 23.75 inch id […]
Stock no. C-2612 15 gpm US Filter Deionization Module CDI-LX US Filter Deionization Hot Water Sanitizable Module Model no.CDI-LX compares to IonPure model IP-LXM30HI-3 Rated for 600 v DC, 10 amps. 15 gpm nominal capacity, 7.5 to 22.5 gpm, 95% recovery Max. feed temperature is 140 deg F., 100 psi max. feed. Silica removal is […]
Stock no. E-4620 75 gallon LEE SS DUAL MOTION JACKETED KETTLE SWEEP AGITATOR Lee Metal Products No. 958B. Jacket rated for 455 psi @ 293 deg. F 32 inch diameter x 28 inch deep. 2 pc. lid, tilt out sweep agitator Has a sweep with wipers and counter rotating blades Motor specs to follow 3 […]
Stock no. E-4608 50 gallon GROEN STAINLESS STEEL JACKETED KETTLE Model GPT 50 SP, National Board no. 28753, year 1965 Jacket rated for 25 psi @ 300 deg. F. U Stamped 36 inch id x 20 inch deep. 35.5 inch o/a height 1.5 inch bottom center > side outlet. (3) jacket fittings, top one with […]
Stock no. B-4435 1/2 Hp LIGHTNIN HIGH SPEED CLAMP MOUNT MIXER Model NS-2, serial no. 6815657 1/2 Hp, 1725/1425 rpm, 60/50 hz, 208-220/440v, 3ph Includes stainless steel shaft and prop (1) available
Stock no. P-3389 (2) 1.5 inch WILDEN POLY DIAPHRAGM PUMP Has 1.5 inch flanged inlet and outlet Air powered To be cleaned and tested prior to shipping (2) available
Stock no. P-3027 1.5 inch Tri-Clamp WAUKESHA SS DISPLACEMENT PUMP Model 030, no. 129508 1.5 inch tri-clamp in and out Will sell pump only or with motor setup (1) available
Stock no. E-4602 (5) 150 gallon STAINLESS STEEL JACKETED TANK SLANT BOTTOM 36 inch x 36 inch with slant bottom, open top, Has bracket for mixer Side is insulated and side jacketed Also has electric tube type heaters for the bottom (unsure if in working order) Has 1.5 inch side outlet. Last used for candle […]
Stock no. G-4030 4.8 cu. ft. SANYO GALLENKAMP PLUS II OVEN with Chart Recorder Model Plus II, cat. no. OPL150.TS1.8, serial no. SG93/06/717 Made in the UK. 110/120 volt, 60 hz, 2065 watts Has analog safety thermostat control to 300 deg. C Honeywell Truline Chart Recorder Stainless steel interior measuring 18 x 18 x 25.5 […]
Stock no. G-4027 3.8 sq. ft. U TUBE STAINLESS STEEL HEAT EXCHANGER Allegheny Bradford serial no. 10770-1-1, National Board no. 2297, year 2002 Repaired in 2018 by the mfg. and looks to be unused since. Labeled Water Heater and Steam Shell and tubes rated for FV and 150 psi @ 350 deg. F to -20 […]
Stock no. G-4018 STERLCO 9 KW HOT WATER HEATER CIRCULATOR 250 DEG. F Model S8410-AX, serial number 53980. 9 Kw total 230 volt, 3 phase, FLA 24 amps. 250 deg. F max (1) available
Stock no. C-2786 4 x 16 inch CARBON STEEL BASKET FILTER 1.25 inch fittings 3.5 x 11.5 inch stainless steel filter basket. 4.5 inch diameter x 16 inch housing 1.25 inch threaded side inlet , side outlet, bottom drain 1/4 inch top vent and (2) on the side, plus a 1/2 inch side out Clamped […]
Stock no. G-4012 NESLAB CFT 33 LIQUID CHILLER RECIRCULATOR Model CFT-33, sn 92AML10020-1, pn 34B103030200 Rated for 950 watts cooling at 60 hz 115 volt, 1 phase, 60 hz, 12.4 amp PD-1 pump, 1.1 gallon reservoir. 3/4 inch supply and return connections Last used with a Spectrometer (1) available
Stock Number: P-2704 2 inch FRISTHAM SANITARY SS CENTRIFUGAL PUMP Mfg. Fristham Pumps Model FP3532-140, s/n FSP3532013497 15 Hp, 3450 rpm, 208-230/460v, 3ph 2 inch outlet, front cover with inlet missing (1) available
Stock Number: P-2709 2 x 1.5 FRISTHAM SANITARY SS CENTRIFUGAL PUMP Mfg. Fristham Pumps Missing plate on this one 5 Hp, 3450 rpm, 230/460v, 3ph 2 x 1.5 inch in and out with (2) additional 1/4 inch fittings (1) available
Stock Number: P-2705 2 x 1.5-6 FRISTHAM SANITARY 316 SS CENTRIFUGAL PUMP Mfg. Fristham Pumps Model FP712-115, no. 12170670 1/2 Hp, 1725 rpm, 230/460v, 3ph 2 x 1.5 inch in and out with 1/4 inch drain (1) available
Stock Number: P-2703 2.5 x 3 inch FRISTHAM SANITARY SS CENTRIFUGAL PUMP Mfg. Fristham Pumps Model FP 3551-215, s/n FP355198232 10 Hp, 1755 rpm, 230/460v, 3ph 2.5 x 3.5 inch in and out with an additional 1 inch port (1) available
Stock Number: P-2470 2 x 1.5 FRISTHAM SANITARY SS CENTRIFUGAL PUMP Mfg. Fristham Pumps Model FPX-722, s/n FPX72298122 3 Hp, 3450 rpm, 208-230/460v, 3ph 2 x 1.5 inch in and out (1) available
Stock Number: P-3245 2 x 2.5 FRISTHAM SANITARY SS CENTRIFUGAL PUMP Mfg. Fristham Pumps Model FS13522-102 R2 S1, s/n FS135221317260 15 Hp, 3450 rpm, 208-230/460v, 3ph 2 x 2.5 inch in and out (1) available
Stock no. G-4037 (3) 2900 WATT POLYSCIENCE LIQUID CHILLER Model N0772046 6160T21E4Q1N, serial 1B11A0222 2900 watt @ 20 deg. C, working temp -10 to +40 C 1 Hp Turbine pump. R134A refrigerant 230 v, 1 ph, 60 hz, 12.2 amp 1/2 inch return, supply, and drain 1.1 gallon reservoir. Compares to updated model 6160T21A130D (3) […]
Stock no. G-4008 AMETEK ROTRON 1 PH BLOWER part no. 027084 3125 rpm, 115/230 v, 1 ph, 1.8/0.9 amp Has 4.5 inch side inlet (same as squirrel cage id) and 3 x 3 1/8 inch outlet Large quantity , UNUSED Will sell by the piece or entire lot
Stock no. G-4010 AMETEK POWER CONDITIONER Model ABC2000-2S, part no. 95083-14R, mfg. Powervar, Waukegan, IL 208/240 v, 9.5/8.5 amp input 120/240 v, 8.3/8.3 amp output, both at 60 Hz (1) available SALE PENDING
Stock no. P-3376 EASYVAC 7 SINGLE STAGE VACUUM PUMP Across International model EasyVac-7, serial no. 7E180504, 11/2018 Rated for 150 microns total pressure, 6.0/7.0 cfm, single stage 110/220 volt, 1 phase, 50/60 Hz, 370 watts LOOKS UNUSED! (1) available
Stock no. P-3392 (2) SOGEVAC SV 40 BI OIL SEALED VACUUM PUMPS Model SV40 BI 960331V3009, 31001243459 Rated for 1.5 Kw, 200-240 v, 50/60 Hz, 1 ph Pumping speed (60 Hz): 48 m³/h, Ultimate pressure: 0.05 mbar Selling as is without a power cord (2) similar available, second one has a broken fan cover on […]
Stock no. P-3367 2 inch WAUKESHA MODEL 34 STAINLESS STEEL DISPLACEMENT PUMP Serial no. 101253 2 Hp vari-drive, 1725 rpm in, 230/460 v, 3 ph, 60 hz with 10.9 to 100 rpm output Has a threaded 1.5 inch top fitting with a 2 inch tri-clamp adapter Bottom outlet is 2 inch dairy thread Mounted on […]
Stock no. B-4419 1/2 Hp LIGHTNIN MIXER GEAR REDUCED Model ND2, serial no. 735911 1/2 Hp, 1725 rpm, 230/460 v, 3 ph, 60 hz Gear reduced, 350 rpm shaft speed Currently setup with a 4-bolt mount It can also be clamp mounted. We have a clamp for it. Takes a 3/4 inch diameter stainless steel […]
Stock no. B-4428 Stainless Steel Double Ribbon for a 150 cu. ft. Ribbon Blender Believed to be for a Young Ribbon Blender 54 inch od outer ribbon diameter, 36.5 inch od inner ribbon Center shaft is 7 inch diameter x 114.75 inch long with 149 inch overall length Ends are 4.5 inch diameter with one […]
Stock no. G-4005 FlatPlate 316L SS HEAT EXCHANGER FP 10×20-120/2p FP Series Model 131007103, serial no. H120CC07109019, date 9-03-20 Rated to 450 psi @ 350 deg. F. 316L Stainless Steel plates, copper brazed Side A volume = .505 cu. ft. side B = .514 cu. ft. (4) 2 inch MPT fittings, 120 plates, 9.8 inch […]
Stock no. G-4004 Yamato model RE-71 Glass 10 liter Rotary Evaporator Serial no. A14002, 220 volt input, 50 hz, 15 amp Motor for rotating is 40 watts max output, 100 v, 50/60 hz, 1 amp Base vessel is 10 inch diameter and sits on a heating mantle Top column is approximately 6.5 inch diameter x […]
Stock no. G-4002 Techne FTU20DPC TU-20D Thermoregulator, -40°C to +200°C for bath chiller 120 volt, 50/60 hz, 1500 watt • Excellent temperature stability: ±0.005°C at 40°C • 1.8kW heater power for fast heat up • 4 digit setting with a bright LED digital temperature display • This unit incorporates an RS232 connection • User adjustable […]
Stock no. A-5608 MILLIPORE MOBIUS MIX500 SYSTEM 500 liter POLY TANK Catalog no. MIX0500LG05, 500 liter poly tank on wheels 35 inch diameter x 38 inch with dished bottom and open top It has a side door with a sight glass and a rectangular opening under There are (2) round openings in the bottom with […]
Stock no. E-4597 100 gallon LEE STAINLESS STEEL JACKETED SWEEP KETTLE Lee Metal Products serial no. 826N, date 9/61 Jacket rated for 90 psi @ 330 deg. F and has been pressure tested 38 inch inside diameter x 30 inch deep with a 1.5 inch bottom center outlet Sweep agitator currently with a hydraulic drive, […]
Stock no. E-4592 2.75 gallon 316 STAINLESS STEEL PRESSURE TANK Alloy Products serial no. 111494-001, year 2002 National Board stamped, no. 1223 Rated for Full vacuum and 50 psi @ 350 deg. F to -20 F 9 inch diameter 10.5 inch with dished bottom and top. Has tri-clamp fittings, 3 inch top center inlet, (2) […]
Stock no. B-4416 COWLES 5 gallon JACKETED STAINLESS STEEL DISPERSER with SWEEP Model VISCO MAX VML 5, serial no. LA-643, p/n 460539, 6/2000 Coated stainless steel jacketed bowl, 14 inch id x 13 inch deep, flat bottom Bowl has a 2 inch side outlet and there is a side jacket inlet and outlet Dual controls […]
Stock no. E-4572 (7) 2.5 gallon 316 STAINLESS STEEL PRESSURE TANK 140 PSI Alloy Products mfg. in 1994 Rated for 140 psi @ 100 F to -20 F 9 inch diameter 8 inch with dished bottom and top. 22 inch o/a height Has threaded fittings, (4) 1/4 inch on top and (1) bottom center outlet […]
Stock no. B-4412 7.5 Hp STAINLESS STEEL HOMOGENIZER MIXER 31 inch shaft Joshua Greaves and Sons (UK) Greaves mixer type GM-5, s/n 16186 30.5 inch shaft, 6.5 inch od stator, 4 inch rotor, 62 inch o/a 7.5 Hp (5.5 Kw), 3600 rpm, 230 v, 3 ph, 3.2 a 4-bolt mount on 22 inch diameter stainless […]
Stock Number: B-4413 5 HP DISPERSER TANK MOUNT HIGH SHEAR MIXER IKA Works Ultra-Turrax type MSM-100, s/n 1923 5 Hp, 3550 rpm, 208-230/460v, 3ph, 60hz, TEFC Stainless steel 32 inch long shaft with 4 inch chopper blade Has separate fixed shaft with female thread end, possibly for a baffle 4-bolt mount on 22 inch diameter […]
Stock no. B-4410 (2) GAST .42 HP STAINLESS STEEL FLANGE MOUNT AIR POWERED MIXER Air motor model 1AM-NCC-11 rated for .42 hp 10,000 rpm max., 100 psi max. Came in with a square shaft coupling, but we will convert to round with a Stainless Steel shaft and a prop. (2) available
Stock no. A-5580 (2) 6 GALLON STAINLESS STEEL TANK ON WHEELS 15.5 inch inside diameter x 7.5 inch straight side with a dished bottom has a clamp on flat top with a 3/4 inch center hole there is a 3/4 inch tri-clamp bottom center outlet Polished sanitary stainless steel. 3 legs on wheels (2) available
Stock no. B-4406 LIGHTNIN 1/4 HP CLAMP MOUNT MIXER Model X5P25, serial no. R03415539-02 .25 Hp, 1725 rpm, 230/460 v, 3 ph direct drive Currently with bolt on mount, clamp mount is available. Comes with stainless steel shaft and prop (1) available
Stock no. A-5583 245 gallon STAINLESS STEEL FLAT BOTTOM TANK 42 inch outside diameter x 41.5 inch deep, flat bottom and top Has a 3/4 inch threaded top inlet and side inlet. A 15 x 12 inch hatch, 8.75 inch top opening and a 3 inch top opening that goes 3/4 the way into the […]
Stock no. E-4567 30 Liter 316L SS REACTOR PRECISION STAINLESS VACUUM 45-100 PSI Serial no. 9100-9, year 1995, National Board no. 5968 (7.92 gallons) Shell rated for 15 psi vacuum and 45 psi @ 350 deg. F Side Only Jacket rated for 100 psi @ 350 deg. F 10 inch inside diameter x 24 inch […]
Stock no. B-4182 1/2 Hp AIR POWERED CLAMP MOUNT MIXER JWI model JLA50, gear reduced Approximately 350 rpm output max Takes bolt on shaft which we can make to order (1) available
Large Antique Balance Gold Apothecary Scale Glass Wooden Case Balance scale measures 48 inch x 22.5 inch x 54 inch tall Cabinet measures 60 inch x 32 inch x 83 inch Weighing platforms are 16 inch diameter Late 1800’s from a Gold Assayer Front cabinet door lifts upwards. Balance has leveling feet.
Stock no. G-3994 5 inch 316 STAINLESS STEEL 4-BLADE AGITATOR HUB Stamped Z-19502-007 5 inch inside diameter, keyed with set screw Takes 4-bolt blades, not included but can be made to order. (1) available WE HAVE OTHER SIZE HUBS WITH OR WITHOUT BLADES AVAILABLE
Stock no. P-3345 (2) 8 X 6 inch MOYNO PROGRESSIVE CAVITY PUMP Model 2G0HS1 CSB-X AAALF, serial no. AS37292-10 (and AS37292-11) This one has a 8 inch top inlet and a reducer to 6 inch end outlet Second one has a side inlet Comes with a belt drive 20 Hp, 1160 rpm, 230/460 volt, 3 […]
Stock no. B-4395 1 liter JAYGO COSMAIR STAINLESS STEEL HIGH INTENSITY MIXER GRANULATOR. Novamix 1 liter, model NX1, serial no. 2589, year 1996 3.5 inch diameter x 5 inch straight side with dished bottom, hinged lid Has bottom center impeller, variable speed 350-3000 rpm, 0.55 Kw Side chopper breaker blade, variable speed 600-6000 rpm, 0.18 […]
Stock no G-3977 PRESSURIZED HUMIDITY TEST SYSTEM 57 psi Express Test Corp model HAST 1000F, Highly Accelerated Stress Test Systems Serial no. 42891, date 8/2009 Polished stainless steel components, rated for 57 psi 220 vac, 5.5 kva, 30 amp, 60 hz, single phase. Labeled 208 v This model can accommodate 12 single width or 6 […]
Stock no. G-3980 5600 Btu/Hr LYTRON RECIRCULATING WATER COOLED CHILLER Model RC011G03BB2C007, serial no. 828488-02 (now Boyd Co.) 115 v, 1 ph, 60 Hz, 15.4 a, 1650 watts. Digital controls 2 gallon capacity reservoir with front water level tube. 1.3 gpm pump Supply and return connections in the rear. Approximately 15 x 25 x 27 […]
Stock no. G-3976 482 deg. F. 1.15 cu. ft. BLUE M OVEN MODEL DCC-146C Serial no. DCC-442, BOM C8-00001. Rated to 250 deg. C/428 deg. F. 208-240 v, 1 ph, 60 hz. L1 = 14/16 a, L2 = 14/16 a 10.5 x 14 x 13.5 inch internal dimensions. O/a 29 x 31 x 80 inch […]
Stock no. A-5569 100 gallon INSULATED FIBERGLASS TANK 25 inch inside diameter x 48 inch straight side, 61 inch o/a height Flat bottom and domed top All fittings are flanged, 8 inch top center, 2 inch side inlet, (2) 1/2 inch side inlets and (1) side outlet. 1.25 inch side outlet (1) available
Stock no. A-5568 95 gallon INSULATED FIBERGLASS TANK 24 inch inside diameter x 48 inch straight side, 61 inch o/a height Flat bottom and domed top All fittings are flanged, 12 inch top center, 4 inch side inlet, 1 inch side inlet. (2) 1/2 inch side inlets and side outlets. 1.25 inch side outlet (1) […]
Stock no. P-3336 .50 inch PLASTIC DIAPHRAGM PUMP No plate 1/2 inch threaded in and out with optional end fittings (plugged) Air powered (1) available
Stock no. E-4559 (3) 300 Liter 316L Stainless Steel Jacketed Tank Cryo Vessel 45-65 psi Sartorius Stedim Biotech, Model CV-00000-0155, Yr. 2007 National Board stamped Shell rated for 45 psi @ 280 F., MDMT -112 F@ 45 psi, MAEWP +15 psi Dimple jacket rated for 65 psi @ 280 F. Internal jacketed baffles on lid […]
Stock no. C-2778 7 x 28 inch ALUMINUM BASKET FILTER 1 inch fittings No plate 7 x 28 inch stainless steel filter basket. 8 1/4 inch diameter x 32 inch housing 1 inch side inlet and bottom outlet (2) 1/4 inch top fittings with vent and gauge. Legs/stand included Last used for BioDiesel (1) available
Stock no. C-2779 7 x 28 inch ALUMINUM BASKET FILTER 2 inch fittings No plate 7 x 28 inch stainless steel filter basket. 8 1/4 inch diameter x 32 inch housing 2 inch threaded > 1 inch side inlet and bottom outlet (2) 1/4 inch top fittings with vent and gauge. Legs/stand included Last used […]
Stock no. C-2776 (2) 7 x 28 inch CARBON STEEL BASKET FILTER 2 inch fittings ROSEDALE Products model M0813-2P-1-150-C-V-70V-P 7 x 28 inch stainless steel filter basket. 8 3/8 inch diameter x 38 inch housing 2 inch threaded > flange side inlet and bottom outlet 1/4 inch top vent and (2) on the side. 1 […]
Stock G-3966 18.8 sq. ft. SS SHELL and TUBE HEAT EXCHANGER 4 pass Thermal Products Inc. serial no. 19103, yr. 2019, NB no. 3332 Certified by JPD Tube and Coil, model BBM 08×36 04 Shell and tubes rated for 150 psi @ 375 deg. F and -20 deg. F Stainless steel tubes and head, carbon […]
Stock no. C-2774 STAINLESS STEEL ROTARY STRAINER WITH 4 INCH FLANGES Compares to a Merco Dorr Oliver MRS model. ID plate is missing Housing is 10 inch diameter on the top and goes to 14 inch diameter It is 22 inch on the straight side and has a flat bolted top There is a dish […]
Stock no. C-2541 8.5 x 22.5 inch CUNO STAINLESS STEEL FILTER HOUSING 8.5 x 22.5 inch inside dimensions with clamped top 1.5 inch top inlet and outlet with a 1/4 inch drain There are no obstructions or brackets inside, smooth finish. Sell with or without stand (1) available
Stock no. G-3962 1 inch 316l/316 STAINLESS STEEL MICRO MOTION MASS FLOW SENSOR Model DS100S128SU, serial no. 204448, type 5, factor 06667 Rated for -240 to 204 deg. C., flow cal factor 66.6715.13 dens cal factor 11868131454.44, tube 2250 psig, conn 275 psi 1 inch flanged inlet and outlet, 17 x 29 x 24 inch […]
Stock no B-3181 (2) 1/4 Hp KINETIC DISPERSION HIGH SPEED VERTICAL DOWN MIXER Model DEMO7 1/4 Hp, 1725 rpm motor, 208-230/460 v, 3 ph 1.5-1 ratio, 1150 rpm shaft output Selling mixer only, tank in picture no longer available (2) available
Stock no. B-4289 PROCHEM AGITATOR DRIVE 240 rpm model PVTO-2-230 Came in with a 5 Hp, 1725 rpm motor. Turns freely. 240 rpm shaft speed. Stainless steel stub shaft Round flange mount on square steel plate Came out of a working environment but motor was used for another drive. Selling as is. (1) available
Stock no. P-3292 (3) 1.5 inch WILDEN 316 STAINLESS STEEL DIAPHRAGM PUMP Air powered and has 1.5 inch tri-clamp fittings (3) available WE DO HAVE SOME WITH THREADED FITTINGS
Stock no. A-5546 (4) 26.4 gallon/100 Liter STAINLESS STEEL PORTABLE TANK Made in France by Chaudrinox SS Approximately 20 inch diameter x 16 inch straight side with dished bottom and top Has a 6 inch top center tri-clamp opening with (3) hose attachments one with a 1/2 inch dip tube. It does not have a […]
Stock no. P-3272 4 inch WAUKESHA STAINLESS STEEL DISPLACEMENT PUMP Model 220, serial number 19466 SS 4 inch tri-clamp fittings Came in with a Eaton hydraulic motor (will sell without motor) (1) available
Stock no. P-3264 (2) .33 HP 1 PH WATCHMAN B-STYLE PUMP CONDENSATE BOILER FEED TYPE 1 inch threaded top port, 1 x 2.5 inch bottom rectangular port Cast Iron construction made by Hoffman 1/3 Hp, 3450 rpm, 115-208/230 v, 1 ph Designed for use on condensate and boiler feed units Precision balanced bronze impeller for […]
Stock no. P-3260 1 inch POLY DIAPHRAGM PUMP Manufacturer unknown 1 inch threaded end fittings Bolted body. Air powered (1) available
Stock no. P-3259 1 inch VERSA-MATIC POLY DIAPHRAGM PUMP 1 inch flanged end fittings Bolted body. Air powered (1) available
Stock no. P-3256 (5) 1 x 1.25 inch WILDEN ALUMINUM DIAPHRAGM PUMP 1 inch x 1.25 inch fittings with optional 1.25 inch end fittings Bolted body. Air powered (5) available
Stock no. P-3248 2.5 x 1.5-6 GOULDS G & L STAINLESS STEEL CENTRIFUGAL PUMP 4SHK6, 4SH2J57D2, date 5/3/16 Approx. 5 Hp (plate worn), 208-230/460 volt, 3 phase 2.5 inch x 1.5 inch flanged fittings, 5.62 inch diameter impeller Last used on a Horizontal Tunnel Washer (1) available
Stock no. P-3230 1 inch GRACO STAINLESS STEEL DIAPHRAGM PUMP HUSKY 1040 Graco Husky 1040 series C04C, part number D74911 1 inch threaded inlet and outlet on one end air powered rated for 42-159 gpm, 120 psi max. Tested in good working condition (1) available
Stock No. E-3679 12 GALLON STAINLESS STEEL PRESSURE TANK Mfg. Alloy Products Corp. 316 stainless steel rated for 130 psi @ 100 deg. F 3 x 4 inch top opening 1/4 and (3)3/8 inch top inlets. 3/4 inch side outlet 12 inch diameter x 24 inch with dished top and bottom On wheels (1) available
Stock no. G-3925 (2) 3.75 inch STAINLESS STEEL BUTTERFLY VALVE POLISHED FINISH 3.75 inch diameter opening Believed to be made in Italy by CORA (2) available
Stock no. C-2756 30 inch SANITARY 316 STAINLESS STEEL CARTRIDGE FILTER CODE 7 Millipore catalog no. CES6944-1, eq. no. FLT-2711 zwa, year 2001 Rated for 150 psi @ 275 deg. F/135 deg. C Takes a single 30 inch long code 7 type twist in filter Has 1.5 inch bottom inlet and outlet, ends have been […]
Stock no. P-3235 1/2 inch POLY DIAPHRAGM PUMP Manufacturer unknown. Has PE50 stamped on side 1/2 inch inlet and outlet Air powered. Selling cleaned and tested. (1) available
Stock no. B-4252 1.5 Hp JWI VERTICAL DOWN MIXER Model JLI-150 1.5 Hp, 1725/1425 rpm input, 208-230/460 v, 3 ph, 60/50 Hz Approximately 300 rpm shaft speed 4-bolt mount, 12 inch square 4.5 inch diameter, 4-bolt flange for shaft mounting (1) available
Stock no. A-5510 500 gallon STAINLESS STEEL TANK with SWEEP MIXER and COIL 56 inch x 4 ft. straight side and slight coned bottom Flat top with hinged lid and mixer Mixer is approximately 2 Hp, belt drive to a right angle gear box More info to follow on mixer, other options available Has a […]
Stock no. E-4446 14.5 gallon 316L STAINLESS STEEL PRESSURE TANK 115 psi Alloy Products no. 101619-001, year 1999 Rated for 115 psi @ 100 deg. F 12 inch diameter x 30 inch with dished bottom and top 1.5 inch top tri-clamp fitting, (2) 1/4 inch and a 1/2 > 1/4 inch with a dip tube […]
Stock no. E-1252 5 gallon STAINLESS STEEL PRESSURE TANK 700 PSI Mfg. SGL Piping Systems, serial no. 14953-B, year 1985 National Board no. 1041, rated for 700 psi @ 200 deg. F. ASME Sect. III, Div I, U stamped 12 inch diameter x 14 inch straight side with dished top and bottom 1 inch flanged […]
Stock no. A-5495 (15) 11 gallon STAINLESS STEEL TANK with AGITATOR 14 inch inside diameter x 17 inch deep with flat bottom, domed top Has a 6 inch top center port with a 4-blade agitator attached 1/4 an 1/2 inch top tube connection in stoppers in 1 inch holes. No bottom outlets Welded seems. (15) […]
Stock no. A-5492 (5) 13 gallon STAINLESS STEEL TANK with AGITATOR 14 inch inside diameter x 20 inch deep with flat bottom and flat fixed top 8 inch tri-clamp port with a 4-blade agitator attached 1/2 inch top tube connection in a stopper in a 7/8 inch hole Also a 1/4 inch fixed tube inlet. […]
Stock no. P-3209 1.5 inch WAUKESHA SS DISPLACEMENT PUMP with HOPPER FEED Waukesha Model 024, no. 378210 05 3 Hp, 1755 rpm, 230/460 v, 7.6/3.8 a with gear reducer with 125 rpm output 1.5 inch tri-clamp bottom outlet Hopper feed, 30 inch diameter > 7 inch x 21 inch tall + 6 inch extension to […]
Stock no. B-4337 1.5 Hp CHEMINEER VERTICAL DOWN FLANGE MOUNT MIXER Model VLA-15, serial number 1-95408-6 1.5 Hp, 1750 rpm, 208-230/460 v, 3 ph motor, 430 rpm shaft speed Came in with 15.5 inch stainless steel faced 12-bolt flange, 19 inch od Has packing gland seal 1.25 inch diameter x 49.5 inch stainless steel shaft […]
Stock no. G-3911 50 Hp RIETZ VENTILATOREN RADIAL FAN BLOWER Model MXE100-016030-00, serial number 266498, year 2010 37 Kw (50 Hp), 2955 rpm, 380-415 v, 65-61 amp, 50 Hz, 3 ph Flanged 14 inch side inlet and 10 inch outlet Mild steel construction O/a 56 inch x 42 inch x 48 inch tall. 1550 lbs […]
Stock no. P-3196 1.5 inch WILDEN SANITARY STAINLESS STEEL DIAPHRAGM PUMP Model M4 1.5 inch tri-clamp fittings, inlet and outlet Air powered. 316 stainless steel. To be rebuilt (1) available
Stock no. E-4504 3 gallon STAINLESS STEEL JACKETED TANK with MIXER 8.75 inch inside diameter x 12 inch deep, flat bottom, clamped top (2) motor option, both 1/8 Hp, 90 v dc with speed controls Motors have different size pulleys for additional speed options (6) 1/4 inch top inlets with (3) dip tubes. 1/4 inch […]
Stock no. P-3177 2.5 x 1.5 inch SANITARY SS CENTRIFUGAL PUMP 5 Hp Alfa Laval Model LKH10, description LKH10M150SS2EN18CA, no. 607081-07 5 Hp, 230/460 v, 3 ph Sanitary stainless steel, 2.5 x 1.5 inch tri-clamp connections Last used in a beverage recovery system (1) available
Stock no. G-3905 4 ft. STAINLESS STEEL LAB HOOD Unsure of manufacturer. Catalog no. 4302PE/SS/SP/RECPT, no. 10248-1 Has a National Air Filter Certificate dated 2015 (2)White fluorescent lights and (1) yellow light with diffuser grids Inch water column gauge for pressure, blower, 115 volt, 1 phase, 60 Hz, 15 amps Top front filter exhausts into […]
Stock no. B-4324 2 cu. ft. KELLY DUPLEX PLOW BLENDER CARBON STEEL Made by The Duplex Mill and Manufacturing Co. Model 191, serial no. 62076 1 Hp, 3 phase motor to 43.35 to 1 ratio gear box, 1700 rpm in, 39 rpm out Control box, Start, Stop, and Reset Has (2) plow type rotating blades. […]
Stock no. G-3897 2730 Btu per Hour HASKRIS WATER COOLED CHILLER Model R025, serial number HB20622 R134A refrigerant, 2 lbs. 10 oz charge 4.9 RLA, 25 LRA, 1 Ph compressor 1/3 Hp pump, 5.6 FLA, 115 v, 1 ph Digital controls, water level gauge Return and supply in and out, water in and out fittings […]
Stock no. P-3118 1.5 inch WAUKESHA STAINLESS STEEL DISPLACEMENT PUMP Model 032, serial no. 145265 Sanitary stainless steel 1.5 inch threaded with tri-clamp adapters Sell pump alone or with motor and gear reducer setup
Stock no. P-3125 1.5 inch WAUKESHA STAINLESS STEEL DISPLACEMENT PUMP Model 030, serial no. 2468 SS, with relief valve Sanitary stainless steel with 1.5 inch tri-clamp fittings One fitting has an extension welded to it
Stock no. B-4300 1/2 Hp CHEMINEER VERTICAL DOWN MIXER Serial number 525557-1 1/2 Hp, 1750 rpm, 230/460 v, 3 ph, Inverter Duty motor Gear reduced, 4.71-1 ratio, 371 rpm shaft speed We make up stainless steel shafts to order. (1) available
Stock no. P-3140 1.5 inch CAST IRON GEAR PUMP No mfg. plate but compares to a Haight model 24UR with relief valve Assembly by Fischer Pump and Valve Co, no. 6974 1.5 inch NPT side inlet and side outlet 1/2 Hp variable speed Eurodrive motor, 230/460 v, 3 ph Gear reducer with 20 to 97 […]
Stock no. B-4293 2 Hp PROCHEM AGITATOR DRIVE 226 rpm Model 20VM2S, made by Chemineer serial no. 517346-1 2 Hp, 1735 rpm, 230/460 v, 5.8/2.9 amps, 3 ph 226 rpm shaft speed. Stainless steel stub shaft Round flange mount on square steel plate
Stock no. E-4457 4.5 gallon 316L STAINLESS STEEL PRESSURE TANK FV 130 psi Alloy Products year 2000 rated for Full vacuum/130 psi @ 100 deg. F 9 inch diameter x 17 inch straight side with dished top and bottom Tri-clamp top inlets = (3) 1/4 inch and a 1/2 inch with dip tube No bottom […]
Stock no. B-4277 2 Hp EURODRIVE FLANGE MOUNT GEAR REDUCER 33 rpm 2 Hp, 1720 rpm, 230/460 volt, 6.2/3.1 amps 52.82-1 ratio, 33 rpm output to 2 inch diameter stub shaft 4 bolt flange mount, 9 inch id x 11.5 inch outside diameter. Bolt holes are 10 inch ctr>ctr across (1) available
Stock no. B-4278 (3) 3/4 Hp EURODRIVE FLANGE MOUNT GEAR REDUCER 40 rpm 3/4 Hp, 1700 rpm, 230/460 volt, 2.90/1.45 amps 42.87-1 ratio, 40 rpm output to 1.25 inch diameter stub shaft 4 bolt flange mount POSSIBLY UNUSED (3) available
Stock no B-4267 1/2 Hp VERTICAL DOWN MIXER NETTCO VARIABLE SPEED Nettco model NSGF-050 1/2 Hp, 1750 rpm, 90v dc motor requires a speed control (missing) Gear reduced (1) available
Stock no. B-4207 1/2 Hp CLAMP MOUNT MIXER JWI model JL50, gear reduced 1/2 Hp, 1725 rpm, 230/460 volt, 3 ph Approximately 350 rpm output Takes bolt on shaft (1) available
Stock no. E-4413 42 liter 316 L Stainless Steel BIO Reactor FV 46.5 psi MBR BIO Reactor AG Switzerland type Labor Pilot 42 L, machine no. 751 Certified by Ludwig Edel Gmbh and Co. no. 90172/4, year 1992 316L stainless steel shell and 304 stainless steel jacket National Board 100, U stamped. U-1 report on […]
Stock no. P-3076 3 inch WAUKESHA STAINLESS STEEL DISPLACEMENT PUMP Model 130 , no. 161132 95 3 inch I line tri-clamp in and out Will sell pump alone or with motor setup (1) available
Stock no. P-3073 1.5 inch WAUKESHA STAINLESS STEEL DISPLACEMENT PUMP Model 030, no. 305467 02 1.5 inch threaded in and out Front cover not shown is included Will sell pump only or with motor setup
Stock no. P-3096 6 inch FRISTHAM STAINLESS STEEL DISPLACEMENT PUMP Model FKL400, no. FKL4001002589 Rated for 600 rpm max, to 300 psi 6 inch 12 bolt flanged in and out Stainless steel rotors (1) available
Stock no. B-4183 LIGHTNIN CLAMP MOUNT LAB MIXER STIRRER 1/15 Hp, 115 volt, 1600 rpm. Model S1U05T Stainless steel shaft, 18 inch to chuck, 22 inch to bottom of mixer With 3.5 inch A310 type blade Optional stainless steel stand available at additional charge (1) available
Stock no. P-2972 3 inch WAUKESHA STAINLESS STEEL DISPLACEMENT PUMP 201U Waukesha model 201U, no. 0000245826 3 inch threaded outlet, 3 x 9 inch rectangular inlet Will sell with or without a motor setup (1) available SALE PENDING
Stock no. E-3353 15 GALLON STAINLESS STEEL PRESSURE TANK Mfg. Alloy Products Corp. 316 stainless steel Rated for 130 psi @ 100 deg. F 3 x 4 inch top opening with lid 1/4 and (3)3/8 inch top inlets. 1.5 and 3/4 inch side outlet 12 inch diameter x 32 inch with dished top and bottom […]
Stock no. E-4384 20 gallon 316 STAINLESS STEEL JACKETED REACTOR Pfaudler no. E53630, rated for 65 psi 20 inch diameter x 16 inch with dished bottom and dished clamped top 2 inch top center inlet plus assorted other top inlets Has a 1.5 inch bottom center outlet (1) available
Stock no. B-4164 .65 Hp LIGHTNIN FLANGE MOUNT MIXER with MECHANICAL SEAL Model XJDS-65, no. 88/345122 .65 Hp, 1140/960 rpm 208-230/460 v, 60/50 hz, 3 ph XP for hazardous locations 1.25 inch diameter shaft, approx. 288 rpm output 9 inch stainless flange face, 11 inch outside diameter (1) available
Stock no. B-4147 5 Hp VERTICAL DOWN MIXER by EKATO Model EM2040, no. 66311-10, year 2004 Originally with a 5 Hp motor shown in picture (to be replaced) 1750 rpm, 3 ph, 60 hz, direct drive Has dust seal, rated for 14.5 psi @ 212 deg. F Takes a 1.5 inch diameter shaft. 4-bolt flange […]
Stock no. B-4148 3 Hp SIDE ENTERING AGITATOR MIX PRO Model 12VSM rated for 345 rpm with 1800 rpm input 1.25 inch diameter x 15 inch stainless steel shaft 17 inch prop Selling without motor setup Looks unused! (1) available
Stock no. C-2711 4 x 13 inch STAINLESS STEEL BASKET FILTER STRAINER Manufacturer SSI Equipment INC. Serial no. 96-4676. model 150 BFSSBWOB. tag no. D-1279. year 1997 5 1/2 inch diameter X 16 inch tall, dished cover and dished bottom stainless steel. 2 inch side in and out. 3/4 inch out in lid and bottom drain […]
Stock no. B-4134 (2) 1/2 Hp CHEMINEER CLAMP MOUNT MIXER model 3JTC-0.50 1/2 Hp, 1750 rpm, 115/230 volt, 3 ph, XP Direct drive. Takes a 1 inch diameter shaft included with a single prop (2) available
Stock no. E-4352 40 gallon STAINLESS STEEL JACKETED TILT KETTLE Sanitary stainless steel from food service Plate is worn and cannot make out, assume low pressure jacket. “U” stamped 26 inch diameter x 22 inch deep Manual crank tilt for dumping, no outlet Mounted on 16 inch diameter x 11 inch tall pedestal. O/a 36 […]
Stock no. C-2317 (2) 7 x 28 inch STAINLESS STEEL BASKET FILTER 2 inch fittings Mechanical Mfg. Co. no. 24019 7 x 28 inch stainless steel filter basket. 9 inch diameter x 33 inch housing (1) 3/4 and (3) 1/4 inch NPT fittings, 2 inch 4-bolt flanged side in & out Legs/stand included rated to […]
Stock no. B-4093 1.5 Hp CHEMINEER VERTICAL DOWN MIXER with motor UNUSED Model 3BTNS-15, no. 1-97411-4 Includes motor not pictured, 1.5 Hp, 1780 rpm, 230/460 v, 3ph Gear reduced with Hub City gear box model 254 5/1, style 0010 UNUSED! In crate with original packing slip (1) available
Stock no. P-2838 1.5 inch STAINLESS STEEL DISPLACEMENT PUMP TUTHILL TUTHILL (CHICAGO). Serial no. 04-0309-10, model 16-s.s, 25526 Stainless steel 1.5 inch threaded in and out 1.5 hp, 1165 rpm, 3 ph,230/460 volt, 5.7-2.8 amp Compares in size to a Waukesha model 15, with Bat wing type rotors (1) available
Stock no. E-3816 2 gallon GROEN ELECTRIC TILT KETTLE MODEL tdb/ 5-8, 1970, National Board no. 54655 Rated for 50 psi @ 300 deg F max. 8 quart capacity, 2 gallons stainless steel 10″ diameter x 8″ deep , dished bottom, open top 208 volt. 1 ph, kw 3.6, SUBJECT TO TESTING **
Stock no. E-4306 30 gallon STAINLESS STEEL REACTOR JACKETED TANK 16 inch diameter x 36 inch w/dished bottom clamped dished top, 21 inch outside diameter has plate with these numbers only 6701-18 4-4100-127 jacketed and insulated, no rating listed tri-clamp top = 4 inch, 2 inch, (2) 2.5 inch, and (4) 1 inch. Approx. 2 […]
Stock no. P-2969 3 inch WAUKESHA STAINLESS STEEL DISPLACEMENT PUMP Model 130, serial no. 216357 98 3 inch I line type tri-clamp fittings Will sell with or without motor and gear reducer setup Several similar available
Stock no. C-2681 1 inch TRI-HOMO STAINLESS STEEL COLLOID MILL Model 4LA, no. 042277 5 Hp, 3485 rpm, 230/460 v, 3ph 1 inch tri-clamp in and out on 6 inch diameter head to be assembled Rated for 15-50 gph low viscosity, 10-30 gph heavy with gravity flow 50-600 gph medium viscosity pressurized to 50 psi […]
Stock no. P-2979 1.5 inch MODEL 030 WAUKESHA STAINLESS STEEL DISPLACEMENT PUMP No. 282589 01 1.5 inch threaded dairy type fittings Sell pump alone or with motor setup (1) available
Stock no. E-4305 200 gallon MUELLER TANK with INTERNAL PLATE COIL Model RHP200, no. 105738 .23 cu. ft. coil volume, 113 psi max, originally R-12 medium 46 inch inside diameter x 33 > 34.5 inch slant bottom 1.5 inch tri-clamp side outlet on low side, 1.5 inch threaded side outlet opposite side 31 inch diameter […]
Stock no. P-2946 1.25 inch GRUNDFOS MULTI STAGE STAINLESS STEEL CENTRIFUGAL PUMP Type CRN-3-5 A-FGJ-G-E-HQQE Model A96083904-P1092596 3/4 Hp, 3450 rpm, 115/230 volt, 1 ph, 60 hz Rated for 116.5 to 156.5 ft. head and to 15.41 gpm 1.25 inch flanged in and out Used for Reverse Osmosis water circulation (1) available
Stock no. A-5195 18.5 x 12 inch POLISHED STAINLESS STEEL CONE TANK 18.5 inch inside diameter x 12 inch with cloth type 6 inch valve for powders NO LONGER WITH STAND Possibly 316 stainless steel (need to test) (1) available Priced cone only
Stock no. P-3069 1 inch WAUKESHA STAINLESS STEEL DISPLACEMENT PUMP Model 006 Has 1 inch id fittings with 1.5 inch threaded inlet and outlet Will sell with or without motor and gear reducer setup (1) available This one was sold, but we have others to be reconditioned.
Stock no. A-3390 6.5 gallon HEAVY GAUGE STAINLESS STEEL TANK POT Has a smooth finish and will clean up well. 14.5″ inside diameter x 9.5″ deep Carbon steel outer base, 2 handles and trunions (2) available, one with a side outlet and the other no outlet
Stock no. A-5136 2.5 gallon STAINLESS STEEL TANK POLISHED FINISH UNUSED DCI Inc, serial no. JS4158C, year 2008 8 inch diameter x 19 inch w/flat top & clamped flat bottom Sanitary polished stainless vertical, UNUSED **** Rated for 0 psi @ 100 deg. F, to -20 deg. F Top= 1.5 inch and (3) 2 inch tri-clamp, (2) […]
Stock no. P-2900 3″ WAUKESHA SANITARY STAINLESS STEEL DISPLACEMENT PUMP Model 130, no. 24602831-10 With 3″ tri-clamp in and out Will sell with or without motor and gear reducer setup Other similar pumps available
Stock no. B-4056 LIGHTNIN LAB STIRRER CLAMP MOUNT MIXER Model 11, no. 7807633 Motor plate needs cleaning, 115 volt input Has Drill Type chuck for shaft (1) available
Stock no B-4017 2 Hp LIGHTNIN VERTICAL DOWN MIXER XP Model NLDG200, no. 700317 2 Hp, 2 speed motor, 1765 /880 rpm, 480 volt, 3 ph XP Gear reduced, 350 rpm/175 rpm shaft speed Flange mount for shaft. Optional angle mount attached (1) available, other similar mixers available
Stock no. B-3999 1/3 Hp LIGHTNIN VEKTOR CLAMP MOUNT MIXER No. 94B87609-10 .33 Hp, 1750 rpm, 208-230/460 volt, 3ph Gear reduced. Takes a 1″ diameter shaft. Stainless steel shaft and prop sized to order. (1) available
Stock no. C-2659 (2) 30 inch x 7 STAINLESS STEEL MULTI CARTRIDGE FILTER No mfg. tag. Takes (7) 30 inch slip in style cartridges 9 inch diameter x 33 inch with dished bottom & clamped top Polished stainless steel exterior with 316 stainless steel flanges Inside is coated but has peeled in a couple of […]
Stock no. E-4233 (2) 100 gallon STAINLESS STEEL JACKETED TANK 24 inch diameter x 48 inch with cone bottom, open top 1 inch bottom center outlet and side outlet, 2 inch side inlet 3/4 inch thermal well. 1/2 side jacket with 1 inch jacket inlet and outlet Has gussets that we can add legs to. […]
Stock no. B-4035 1 Hp LIGHTNIN CLAMP MOUNT MIXER Model ND3, no. 553640 1 Hp, 1760 rpm, 208-230/460 v, 3ph Gear reduced, 350 rpm shaft Flange for shaft mount. Sell with or without shaft and prop (1) available
Stock no. P-2834 1.5 inch VIKING STAINLESS STEEL DISPLACEMENT PUMP Model S2S rated for 6 gpm, 150 psi Has 1.5 inch tri-clamp in and out. Originally with 2 Hp, 1725 rpm, 208-230/460 v, 3ph Motor to be replaced or sell without (1) available
Stock no. E-4174 350 gallon 304 STAINLESS STEEL JACKETED TANK 41.5 inch inside diameter x 60 inch with dished bottom, open top Has 2 sets of brackets for baffles, approx. 2 inch bottom center outlet Side probe inlet and 1 inch side outlet Has carbon steel jacket, side and bottom inlets and outlets (1) available
Stock no. B-3992 2 inch SPECO STAINLESS STEEL INLINE MIXER Model 2TSPL, s/n 79-10635 o/a 24 inch x 46 inch x 46 inch including cart w/(4)wheels. 2 inch x 2 inch in and out w/ reducer flange to 1 inch 3 hp, 1735 rpm input, variable speed 420-4200 rpm output 230/460v, 3ph, 60hz. (1) available
Stock no. G-2809 8 gallon POLISHED STAINLESS STEEL TANK DISPENSER SETUP 10 inch diameter x 20 inch with dished bottom, clamped top No manufacturer plate but marked model 17001-2-10, 28 inch x 1.5 inch tri. Serial no. 00-8171-1A 1.5 inch tri-clamp bottom center outlet, 1.5 inch side out, 2 inch side in Assorted top fittings […]
Stock no. P-2031 .25 inch AMERICAN LEWA INC. METERING PUMP Serial no. 228399-010.004, 1991, model FC 08 Stainless steel, (4) .25 inch in and out 1/2 hp, 1725 rpm, 3 ph, 230/460, 1.5 amp (2) available
Stock no. P-1951 1 inch STAINLESS STEEL WAUKESHA DISPLACEMENT PUMP model 03 Model 03, no. D041000SS. Sanitary use 1 inch in and out with sanitary threads and tri-clamp adapters Will sell with or without motor setup. No longer with drive pictured. (1) available
Stock no. B-3619 4.5 inch 4-BLADE STAINLESS STEEL TURBINE AGITATOR HUBS 45 degree pitch paddle, keyed We can also make up straight blades to order. (3) available
Stock no. E-3921 (2) 5 gallon ELECTRICALLY HEATED GROEN TILT KETTLE Model TDB-7-20 rated for 50 psi @ 300 deg. F. Year 1990 440 volt, 3 phase 14 inch inside diameter x 12 inch deep, 1 inch jacket fittings Subject to testing (2) available
Stock no. A-5048 530 gallon 304 STAINLESS STEEL TANK UTENSCO no. 9405-1, 1978 52 inch diameter x 5 ft with slant bottom, closed top 16 inch, 2 inch, and 1 inch top inlets, 2 inch side outlet Industrial use. Has some dents. Tank needs bottom fitting repaired, otherwise seems to be okay. Selling as is […]
Stock no. B-3957 1/2 Hp EASTERN VERTICAL DOWN MIXER FRG 3C 949.02 1/2 Hp, 1725 rpm, 230/460 v, 3ph Gear reduced (1) available
Stock no. P-2812 2.25 x 2.25 STAINLESS STEEL SUMP PUMP Has threaded 2.25″ in and out, all stainless steel construction 3-wire single phase, most likely 115 v No identifying marks From a food plant, subject to testing (1) available
Stock no. B-3908 (2) 1/4 Hp VERTICAL DOWN GEAR REDUCED MIXER UET Excel Ram 20, yr 2005 1/4 Hp, 1750 rpm, 208-230/460v, 3ph 350 rpm shaft speed, 4 bolt mount (2) available
Stock no. B-3942 1 Hp AIR MIXER with SPEED CONTROL and TRI-POD MOUNT Approx. 1 Hp by physical size of mixer, looks like a Gast mixer Automatic and manual speed controls with forward and reverse Adjustable tri-pod mount for top of tank With regulator and filter (1) available
Stock no. P-2788 3 inch APV DW5 SANITARY STAINLESS STEEL DISPLACEMENT PUMP Type DW5/093/025, no. 10002079, 27128028 3 inch tri-clamp in and out Rated to 24.6 gallons per 100 rpm, to 362 psi Aseptic positive displacement bi-lobe pump (1) available
Stock no. B-3771 Pro Quip 3 Hp right angle drive mixer Model 300 JLX10P, no. 16007 Rated for 3 Hp, 10-1 ratio Takes a 1.5 inch diameter shaft Sell with or without a motor (1) available
Stock no. B-3768 1/2 Hp NEPTUNE CLAMP MOUNT MIXER Neptune 1/2 Hp clamp mount mixer model D-1.7, no. 117713 Direct drive, with 90 v dc motor. Requires 115 v speed control not included Will include a clamp for mounting (1) available
Stock no. P-2719 Iwaki America plastic composite centrifugal pump CMD 187, no. 0510060620 1.5″ x 1.75″ id in and out 3 Hp, 3450 rpm, 208-230/460v, 3ph Rated for 10 gpm, 70 ft. hd. Does have a broken base, but otherwise looks great. (1) available
Stock no. G-3530 4 Kw HOT WATER HEATER 480 volt Ogden 4 Kw hot water heater, circulating type Catalog no. K8A-18-0030-M2 480 v, 3 ph 2.5″ side inlet and outlet, 1″ drain (1) available
Stock no. G-3525 MSI 2,000 lb capacity digital hanging scale Challenger 2, model 3360 Battery powered (1) available
Stock no. E-4021 (3) 125 gallon STAINLESS STEEL TANK WITH EXTERNAL COILS 125 gallon stainless steel cone bottom tank with external coil wrap 30 inch diameter x 36 inch straight side with 6 inch cone bottom, flat top 3 inch bottom center outlet, 1 inch diameter coils, hinged lid (not shown) Coils are not part […]
Stock no. B-3756 Chemineer 1.5 Hp gear reduced mixer No. 5544072 1.5 Hp, 1725/1450 rpm, 208-230/460v, 3ph (1)available
Stock no. C-2513 5.5 x 13 inch ROSEDALE STAINLESS STEEL BASKET BAG FILTER Model/serial no. C022423, mdl 6-12-1p-150-d-s-b-n-b, 6/5/89 Manufacturer ROSEDALE Takes a 5.5 x 13 inch basket, housing 5 5/8 x 17.5 inch Stainless steel rated for 150 psi, single pass 1.25 inch threaded side in and bottom out Adjustable legs. MISSING BASKET***
Stock no. A-4780 7 inch x 6 inch STAINLESS STEEL CONE BLEND TANK Labeled Etikettenfeld 7 inch diameter x 6 inch with clamp lid High Polished stainless steel, Pharma grade No outlet (1) available
Stock no. P-2572 1 inch SANITARY STAINLESS STEEL DISPLACEMENT PUMP Flowtech Unibloc Size 300, serial no. 0098 Sanitary stainless steel Rated for 2.8 gal/per/rev, 28 gpm max. 1 inch id tri-clamp in & out No longer with drive in picture, but we may have something available.\ (1) available
Stock no. E-3856 (2) 3.5 liter STAINLESS STEEL PRESSURE TANK Manufacturer ACME IND.EQUIP./THE HODGE GROUP 4.5 inch inside diameter x 11 inch with dished bottom, clamped flat top Construction/configuration stainless steel vertical Full Vacuum/110 psi @ 325 deg. F. Year 1995 No bottom outlet! With agitator. NO MOTORS INCLUDED!! (2) AVAILABLE
Stock no. P-2717 1 inch VIKING STAINLESS STEEL DISPLACEMENT PUMP Viking Pump, Inc. Model/serial no. LC20S, 107067/a/96 Stainless steel construction 1 inch flanged in and out (1)available
Stock no. P-2564 1 inch GRUNDFOS STAINLESS STEEL MULTI STAGE CENTRIFUGAL PUMP Grundfos Pumps no. CRN4 60 a-a-a, c-8932 Stainless steel vertical multi-stage pump rated for 300 psi @ 250 deg max, 5 cu. meters/hr.(22 gpm), 68 meters head (223 ft.) 1 inch inlet and outlet Approx. 3 Hp, 208-230/460 volt, 3ph (1)available.
Stock no. P-2627 3 inch MODEL 130 WAUKESHA SS DISPLACEMENT PUMP Serial no. 14605, model 130 stamped R1-2 Sanitary stainless steel 3 inch threaded with tri-clamp adapters No longer with drive (1)available
Stock no. C-1212 7.50 HP FRYMA STAINLESS STEEL COLLOID MILL TYPE MZ/80-R, no. 78.1670 1.50 inch stainless steel mill colloid 1.5 inch top in, 1 x 3.5 inch out It is 440 volt, XP, 2 speed motor production rates from 100 to 1000 liters of product per hour ON STAND WITH WHEELS. We may have […]
Stock Number: P-2710 Fristham 2.5 x 2 inch 316 Sanitary Stainless Steel centrifugal pump Model FP 742-195, serial no. 42174266 20 Hp, 3510 rpm, 230/460v, 3ph, 45.6/27.8 amp 2.5 x 2 inch tri-clamp in /out From a BioPharma operation (1) available
Stock Number: D-1083 21 CU. FT. STAINLESS STEEL DOUBLE CONE VACUUM DRYER-BLENDER Mfg. PAUL O. ABBE, INC. Serial no. A40755, RotoCone, maximum bulk density of 150 lbs./cu. ft. 32 cu. ft. total. Working volume 65% fill level is 21 cu. ft. ORIGINALLY WITH A 1.5 Hp gear motor for drive, 5 rpm drum speed, 5 Hp […]
Stock Number: B-3327 Mfg. Lightnin Vektor model VST18N 1/4 Hp, 1725 rpm, 230/460v, 3ph Flange mount with stainless steel face Sell with or without shaft and prop (1) available
Stock Number: B-3563 1/4 Hp LIGHTNIN VEKTOR CLAMP MOUNT MIXER high speed Mfg. Lightnin Vektor model V1P18N 1/4 Hp, 1725 rpm, 230/460 v, 3ph High speed stainless steel shaft made to order and prop included Several similar mixers available!! (1) available
Stock Number: B-2276 1/4 HP LIGHTNIN VEKTOR CLAMP MOUNT MIXER Mfg. Lightnin Vektor model V6P18 1/4 Hp, 1740 rpm, 208-230/460 v, 3ph gear reduced stainless steel shaft made to order and prop included (1) available
Stock Number: B-3564 (2) .33 HP LIGHTNIN VEKTOR CLAMP MOUNT MIXER 115/230 v Mfg. Lightnin Vektor model V5P25 1/3 Hp, 115/230 v, 1 ph gear reduced stainless steel shaft made to order and prop included (2) available
Stock Number: B-3349 1/2 HP VERTICAL DOWN LIGHTNIN MIXER Mfg. Lightnin Vektor model VIT37 1/2 Hp, 1720 rpm input, high speed, 230/460v, 3ph 10 inch flange mount with mechanical seal for 1″ diameter shaft (1) available
Stock Number: B-3718 Lightnin .65 Hp clamp mount mixer 1750 rpm, 208-220/440 v, 3ph motor Need to verify model number High speed model (1) available
Stock Number: C-2469 1 inch PALL FILTRON MAXIMATE TANGENTIAL FLOW FILTER Mfg. Pall Filtration Maximate Tangential Flow Cassettes, no. 22074.01 (2) 1 inch and (2) 1/2 inch tri-clamp inlets and outlets Membranes measure 2.5 inch x 13 inch x 1 inch thick Overall measurements 14 inch x 7 inch x 14.25 inch (1) available
Stock Number: B-2901 1 HP NETTCO VERTICAL DOWN MIXER Mfg. Nettco Corp Model NSGF-100 1 Hp, 1140 rpm, 230/460 v, 3ph gear reduced (1) available
Stock Number: C-2211 4 inch X 12 inch STAINLESS STEEL BASKET BAG FILTER Mfg. Ronningen-Petter, serial nos. S06148 and S06149 Rated for 300 psi @ 220 deg. F Twin 316L ss housings 2 inch inlet and outlet, 4.5 x 12 inch baskets Will clean before shipping. Selling as pair! MISSING BASKETS (1) available
1200 MM RECESSED GASKETED FILTER PRESS PLATES Stock No. C-2158 Recessed and gasketed 1200 mm poly filter plates, 47 inch square (33) recessed and gasketed poly plates, (29) with spickets (4) 2 inch corner in and out came from a Sperry Filter Press Will consider selling individually Includes (2) head plates
Stock Number: C-1316 1 HP MICRO PULVERIZER GRINDER PARTS Mfg. HOSOKAWA MICRON POWDER SYSTEMS( MIKROPUL) TYPE SH, S/n 80J-5274 2 in. top inlet, 1.5 in. x 7 in. bottom outlet SS fill funnel 1 HP, 3450 RPM, 3 PH PLEASE NOTE THIS GRINDER IS CURRENTLY MISSING THE HAMMER SETUP (1) available
Stock Number: B-3286 7 .5 HP NORD GEAR MOTOR INLINE Mfg. Nord Gear Corp. 2006208910963 7.5 Hp, 1735 rpm, 3ph 5.50 ratio, 318 rpm output (1) available
Stock Number: P-2297 1 INCH G & L MULTI STAGE STAINLESS STEEL CENTRIFUGAL PUMP Mfg. G & L Pump div. of ITT Goulds Model SSV 1SVOK4 1 Hp, 3450 rpm, 230/460v, 3ph Stainless Steel contacts Rated for 360 psi @ 250 deg. F Includes Aquavar 56 controller (1) available
Stock Number: P-2330 Mfg. Worthington 60 740846 1.5 x 1 inch in & out, 6 inch impeller Will sell as is or with motor setup (1) available
Stock Number: P-2562 1 inch GRUNDFOS SS MULTI-STAGE CENTRIFUGAL PUMP Grundfos stainless steel multi-stage pump Model CR4, NH-C5-60, 9046 Rated for 300 psi @ 250 deg. F 3 Hp, 3450 rpm 208-230/460 v, 3ph 1 inch in & out. Stainless Steel (1) available
Stock Number: P-2119 2 X 1.5 INCH SANITARY SS CENTRIFUGAL PUMP 15 Hp Mfg. Tri-Clover Pump Model C21 21647RH922 2 x 1.5 inch tri-clamp in and out 15 Hp, 3525 rpm, 230/460v, 3ph Rated for 50 gpm, 235 ft. head (1) available
Stock Number: P-1830 2 X 1.25 INCH STAINLESS STEEL CENTRIFUGAL PUMP Mfg. G & L Pumps div. of ITT/Goulds Model SST 5 Hp, 1730 rpm, 208-230/460v, 3ph 2 x 1.25 inch with 9 3/4 inch impeller (1) available
Stock Number: P-2182 2 x 2.5 inch FRISTHAM SANITARY SS CENTRIFUGAL PUMP Mfg. Fristham Pumps Model FP 742-205, s/n FP74296696 15 Hp, 3450 rpm, 208-230/460v, 3ph 2 x 2.5 inch in and out, 1/4 inch drain rated for 110 gpm, 260 ft. hd. (1) available
Stock Number: P-2178 3 X 1.5 INCH INGERSOLL RAND CENTRIFUGAL PUMP Mfg. Ingersoll Rand 3×1.5x8HOC Stainless steel Rated for 150 gpm, 200 ft. hd., 350 psi @ 3500 rpm 3 inch x 1.5 inch in and out Sell with or without motor setup (1) available
Stock Number: P-2642 1/2 inch Wilden Poly Diaphragm Pump Air powered 1/2 inch threaded connections (2) available
Stock Number: P-2640 Wilden 1 x .75 Aluminum Diaphragm Pump 3/4 inch top out, 1 inch bottom in Model P2/ARRP/NE/NE/ABN Air powered (1) available
Stock Number: P-2025 1.5 INCH UNIBLOC STAINLESS STEEL DISPLACEMENT PUMP Flowtech Unibloc ss displacement pump Model Labtop 350, no. 3987 1.5 inch tri-clamp in and out, 316 Sanitary Stainless steel 15 amp, 115v, speed control with reverse Pump and motor works. Problem with digital controls. Can setup with motor and gear reducer. (1) available
Stock Number: P-2591 3 INCH WAUKESHA SANITARY STAINLESS STEEL DISPLACEMENT PUMP 130 Model 130, no. 190874 SS 3 inch tri-clamp in & out Currently with a 14-1 ratio gear reducer Will sell with or without motor setup (1) available
Stock Number: P-2044 1/4 INCH METERING PUMP FMI Mfg. FMI Fluid Metering Inc. Model VO6231AD11 Rated 0 to 12 ML per min., 100 psi max .96 amp, 115v, 1ph, 60hz Stainless steel with ceramic piston 1/4 inch in and out (4) available
Stock Number: P-2299 Fisher Scientific Speed Aire 4Z335-0690 1/4 Hp, 1725 rpm, 115v, 1ph 1/4 inch in and out We also have a similar 1/3 Hp and 1/6 Hp (1) available
Stock Number: P-2301 17 cfm GAST ROTARY VANE VACUUM PUMP Mfg. Gast Model 2065-V2A, rated to 17 cfm, 25 psi, 28 inches Hg Has 3/4 inch in and out Labeled rebuilt (1) available
Stock Number: P-1924 3 GPM GRACO AIR OPERATED POWER WASHER PUMP Mfg Graco Pump Model IGF Hydra Clean Rated for 3 gpm Power washer application For more info, visit the following page: http://www.graco.com/Internet/T_PDB.nsf/SearchView/Hydra-Clean (1) available
Stock Number: P-1121 Mfg. Lincoln Controls Hydraulic Systems Double A pump Model PVV-06-10A2 5 Hp, 208-230/460v, 3ph Control switch, oil resevoir, temp. guage. ONE AVAILABLE! (1) available
Stock Number: B-3285 Mfg. SEW Eurodrive 282R801-50, 89005591 15 Hp, 1750 RPM, 230/460V, 3PH 204 rpm output (1) available
Stock Number: A-2872 110 GALLON FIBERGLASS TANK with DISHED BOTTOM and TOP Mfg. FI Company, 5/90 Rated to 5 psi pressure Derakane 470 resin 3 ft. x 2 ft. w/ dished top and bottom 1.8 in. bottom center outlet, 18 in. tmw. On wheels. 3 in. and (4)1.5 in. top in. Flange to mount mixer. […]
Stock Number: G-2283 2000 LBS LEXCO PLATFORM LIFT TABLE Mfg. Lexco Model HT-2338-2F 20 x 30 inch top, 30 inch tall in down position 46 inch in up position Foot pump hydraulic lift Has 20 x 20.5 x 12 inch tall galvanized box that can be removed (1) available
Stock Number: E-3460 Mfg. Alloy Products Corp. Rated for 130 psi @ 9 x 7 inch with dished top and bottom 5 x 6 inch top port. (4) 3/8 inch top inlets NO LONGER WITH A LID but they are available from other sources (1) available
Stock Number: E-3778 (42) Mfg. Alloy Products Corp 9 inch diameter x 12 inch + dished bottom & top Rated for 120 psi @ 100 deg. F 2 inch top threaded (npt) center fitting (have one with a cap) (4) 3/4 inch tri-clamp top fittings. No bottom outlet (42) available
Stock Number: E-3471 Mfg. Alloy Products Corp. Rated for 130 psi @ 100 deg. F 9 inch diameter x 14 inch with dished top and bottom 5 x 6 inch oval top port, (4) 3/8 inch top in Dip tube, no bottom outlet. Rubber base 316L sanitary stainless steel. NO LONGER WITH A LID but […]
Stock Number: E-3834 (8) 4.5 GALLON STAINLESS STEEL PRESSURE TANK Mfg. Alloy Products, 316L stainless steel Rated to 140 psi @ 100 deg. F 9 inch x 16 inch (approx.) Small oval top port and (4) 1/4″ NPT threaded top fittings No bottom outlets (8) available, pressures 130 to 155 psi available
Stock Number: E-3862 (2) 4.5 gallon 316L STAINLESS STEEL PRESSURE TANK Mfg. Alloy Products Rated for 100 psi @ 100 deg. F 316L stainless steel with rubber base 9 inch diameter x 16 inch + dished top & bottom (2)1/2 and (2)1/4 inch NPT top inlets, 4 x 6 inch top port No bottom outlet […]
Stock Number: E-3830 (2) 13 gallon 316L STAINLESS STEEL PRESSURE TANK Mfg. Alloy Products Rated 115 psi @ 100 deg. F 12 inch x 28 inch, 13 gallon/50 liter capacity (4) 1/4 inch NPT threaded top inlets 5 x 6 inch top center port. No outlet 316L stainless steel (2) available
Stock Number: E-3885 1.2 GALLON STAINLESS STEEL JACKETED PRESSURE TANK Mfg. Acme Industrial Shell= FV/110 psi, jkt.= 80 psi @ 325 deg. F Marked 4 liter capacity, Total volume = 1.20 gallon 4.75 inch id x 15.75 inch, flat bottom, no outlet Has clamped flat top with dip tube (1) available
Stock Number: G-2614 Mfg. K-Tek Corp. Rated for FV/900 psi, 150 to 325 F 1.0 specific gravity 316 stainless steel 3/4 in. side inlet and outlet 3 inch diameter x 52 inch ss housing (1) available
Stock Number: E-1956 5 gallon STAINLESS STEEL REACTOR 400 psi Mfg. Proctor and Gamble S/n PV8145-1, NB 2, 1981, rerated in 1990 Shell 400 psi @ 500 deg. F, 171 psi jacket 12 inch x 18 inch, dished bottom, flat top Sell with or without a mixer Stainless steel shell, carbon steel jacket (1) available
Stock Number: E-2055 5 gallon 316 STAINLESS STEEL REACTOR 350 psi Mfg. G H Hicks div. of Chemineer no. 11741-24121, 1974, NB 925 Shell = 350 psi @ 500 F, jkt.= 150 psi Ribbon type scrape agitator 316 stainless steel shell, carbon steel jacket 14 inch diameter x 13 inch, dished bottom, flat top (1) […]
Stock Number: A-2768 40 GALLON 316 STAINLESS STEEL TANK with MIXER Mfg. DCI, Inc (Dairy Craft Inc.) Serial no. 92-PH-44148-A 23 in. x 24 in., dished bottom, flat top Has 1/2 Hp Eurodrive agitator, 230/460 v, 3ph 316 Sanitary stainless steel. 1 in. tri-clamp outlet Internal baffle, hinged lid, polished!. Comes with an electric heating […]
